PVE 4.0 Beta2 + qemu + acpi
- Thread starter lausser
- Start date
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Note that kernel 4.2.1 has been released some day ago, with kvm fixes.
https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.2.1
I can try to backport some patches to see if it's help. (else we need to wait for next ubuntu 4.2.1 kernel release, on which proxmox kernel is based)
https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.2.1
I can try to backport some patches to see if it's help. (else we need to wait for next ubuntu 4.2.1 kernel release, on which proxmox kernel is based)
Also, can you try to launch the qemu process manually ?
you can have the command like with a simple "ps -aux".
find the "kvm -id xxx ...." line when is vm is started from gui
stop the vm.
then launch the vm with pasting the command line, with removing "-daemonize" option from command line.
and check if some error message are displayed or not.
Also maybe can you look at kernel log, with:
and
you can have the command like with a simple "ps -aux".
find the "kvm -id xxx ...." line when is vm is started from gui
stop the vm.
then launch the vm with pasting the command line, with removing "-daemonize" option from command line.
and check if some error message are displayed or not.
Also maybe can you look at kernel log, with:
Code:
journalctl -f _TRANSPORT=kerneland
Code:
dmesgNothingAlso, can you try to launch the qemu process manually ?
you can have the command like with a simple "ps -aux".
find the "kvm -id xxx ...." line when is vm is started from gui
stop the vm.
then launch the vm with pasting the command line, with removing "-daemonize" option from command line.
and check if some error message are displayed or not.
Also maybe can you look at kernel log, with:
journalctl -f _TRANSPORT=kernel
Code:
root@pve:/home# journalctl -f _TRANSPORT=kernel
-- Logs begin at Thu 2015-09-24 14:49:39 MSK. --
Sep 24 16:53:49 pve kernel: device tap102i0 entered promiscuous mode
Sep 24 16:53:49 pve kernel: vmbr0: port 3(tap102i0) entered forwarding state
Sep 24 16:53:49 pve kernel: vmbr0: port 3(tap102i0) entered forwarding state
Sep 24 16:53:53 pve kernel: vmbr0: port 3(tap102i0) entered disabled state
Sep 24 16:56:48 pve kernel: perf interrupt took too long (2579 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Sep 25 10:23:26 pve kernel: vmbr0: port 2(tap100i0) entered disabled state
Sep 25 10:23:39 pve kernel: device tap100i0 entered promiscuous mode
Sep 25 10:23:39 pve kernel: vmbr0: port 2(tap100i0) entered forwarding state
Sep 25 10:23:39 pve kernel: vmbr0: port 2(tap100i0) entered forwarding state
Sep 25 10:24:06 pve kernel: vmbr0: port 2(tap100i0) entered disabled state
dmesg
Code:
root@pve:/home# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0-1-pve (root@elsa) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Mon Sep 21 10:49:08 CEST 2015 ()
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-1-pve root=/dev/mapper/pve-root ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf378fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf379000-0x00000000cf38efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf38f000-0x00000000cf3cdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cf3ce000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. PowerEdge R710/0XDX06, BIOS 6.4.0 07/23/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x430000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-CFFFF write-back
[ 0.000000] D0000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FF00000000 write-back
[ 0.000000] 4 base 0200000000 mask FE00000000 write-back
[ 0.000000] 5 base 0400000000 mask FFC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcf379 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0200b000, 0x0200bfff] PGTABLE
[ 0.000000] BRK [0x0200c000, 0x0200cfff] PGTABLE
[ 0.000000] BRK [0x0200d000, 0x0200dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42fe00000-0x42fffffff]
[ 0.000000] [mem 0x42fe00000-0x42fffffff] page 2M
[ 0.000000] BRK [0x0200e000, 0x0200efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x420000000-0x42fdfffff]
[ 0.000000] [mem 0x420000000-0x42fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41fffffff]
[ 0.000000] [mem 0x400000000-0x41fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcf378fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcf1fffff] page 2M
[ 0.000000] [mem 0xcf200000-0xcf378fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] BRK [0x0200f000, 0x0200ffff] PGTABLE
[ 0.000000] BRK [0x02010000, 0x02010fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34fbe000-0x367d6fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F1150 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000000F1254 00009C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 0x00000000CF3B3F9C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 0x00000000CF38F000 003DD0 (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 0x00000000CF3B6000 000040
[ 0.000000] ACPI: FACS 0x00000000CF3B6000 000040
[ 0.000000] ACPI: APIC 0x00000000CF3B3478 00015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 0x00000000CF3B35D8 000050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 0x00000000CF3B362C 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DMAR 0x00000000CF3B3668 0001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 0x00000000CF3B38C4 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 0x00000000CF3B3904 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 0x00000000CF3B3A3C 000024 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 0x00000000CF392F70 000270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 0x00000000CF3931E0 0003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 0x00000000CF392DD0 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 0x00000000CF392E00 000170 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 0x00000000CF3B3BC0 000370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 0x00000000CF3B3F34 000064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CF3B7000 002104 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 0x10 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x16 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x11 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x15 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x17 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 1 [mem 0x00000000-0xcfffffff]
[ 0.000000] SRAT: Node 0 PXM 1 [mem 0x100000000-0x42fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x42fffffff] -> [mem 0x00000000-0x42fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42ffed000-0x42fff1fff]
[ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cf378fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042fffffff]
[ 0.000000] On node 0 totalpages: 4190998
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13198 pages used for memmap
[ 0.000000] DMA32 zone: 844665 pages, LIFO batch:31
[ 0.000000] Normal zone: 52224 pages used for memmap
[ 0.000000] Normal zone: 3342336 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 24 hotplug CPUs
Code:
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf379000-0xcf38efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf38f000-0xcf3cdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf3ce000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88041ee00000 s97688 r8192 d29288 u262144
[ 0.000000] pcpu-alloc: s97688 r8192 d29288 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4125491
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-1-pve root=/dev/mapper/pve-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16390036K/16763992K available (8017K kernel code, 1325K rwdata, 3808K rodata, 1472K init, 1300K bss, 373956K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32
[ 0.000000] NR_IRQS:16640 nr_irqs:1224 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-31.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2261.195 MHz processor
[ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.39 BogoMIPS (lpj=9044780)
[ 0.000039] pid_max: default: 32768 minimum: 301
[ 0.000046] ACPI: Core revision 20150619
[ 0.002709] ACPI: All ACPI Tables successfully acquired
[ 0.002739] Security Framework initialized
[ 0.002759] AppArmor: AppArmor initialized
[ 0.002760] Yama: becoming mindful.
[ 0.003862] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.007433] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008975] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008995] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009289] Initializing cgroup subsys blkio
[ 0.009293] Initializing cgroup subsys memory
[ 0.009302] Initializing cgroup subsys devices
[ 0.009306] Initializing cgroup subsys freezer
[ 0.009308] Initializing cgroup subsys net_cls
[ 0.009311] Initializing cgroup subsys perf_event
[ 0.009314] Initializing cgroup subsys net_prio
[ 0.009316] Initializing cgroup subsys hugetlb
[ 0.009337] CPU: Physical Processor ID: 1
[ 0.009339] CPU: Processor Core ID: 0
[ 0.009343] mce: CPU supports 9 MCE banks
[ 0.009352] CPU0: Thermal monitoring enabled (TM1)
[ 0.009359] process: using mwait in idle threads
[ 0.009362] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.009363] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009484] Freeing SMP alternatives memory: 28K (ffffffff81ebd000 - ffffffff81ec4000)
[ 0.011256] ftrace: allocating 31308 entries in 123 pages
[ 0.026849] DMAR-IR: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
[ 0.026854] Switched APIC routing to physical flat.
[ 0.027387] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.174128] smpboot: CPU0: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz (fam: 06, model: 1a, stepping: 05)
[ 0.174153] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.174169] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.174171] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.174173] ... version: 3
[ 0.174174] ... bit width: 48
[ 0.174175] ... generic registers: 4
[ 0.174176] ... value mask: 0000ffffffffffff
[ 0.174177] ... max period: 000000007fffffff
[ 0.174178] ... fixed-purpose events: 3
[ 0.174179] ... event mask: 000000070000000f
[ 0.175073] x86: Booting SMP configuration:
[ 0.175075] .... node #0, CPUs: #1
[ 0.178818] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.178918] #2 #3 #4 #5 #6 #7
[ 0.198250] x86: Booted up 1 node, 8 CPUs
[ 0.198254] smpboot: Total of 8 processors activated (36179.12 BogoMIPS)
[ 0.204644] devtmpfs: initialized
[ 0.208466] evm: security.selinux
[ 0.208467] evm: security.SMACK64
[ 0.208468] evm: security.SMACK64EXEC
[ 0.208469] evm: security.SMACK64TRANSMUTE
[ 0.208470] evm: security.SMACK64MMAP
[ 0.208471] evm: security.ima
[ 0.208471] evm: security.capability
[ 0.208619] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.208719] pinctrl core: initialized pinctrl subsystem
[ 0.208835] RTC time: 11:49:33, date: 09/24/15
[ 0.208954] NET: Registered protocol family 16
[ 0.214314] cpuidle: using governor ladder
[ 0.218313] cpuidle: using governor menu
[ 0.218411] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.218413] ACPI: bus type PCI registered
[ 0.218414] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.218494] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.218496] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.218508] PCI: Using configuration type 1 for base access
[ 0.219142] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.219143] mtrr: probably your BIOS does not setup all CPUs.
[ 0.219144] mtrr: corrected configuration.
[ 0.222798] ACPI: Added _OSI(Module Device)
[ 0.222800] ACPI: Added _OSI(Processor Device)
[ 0.222801] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.222803] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.223823] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.224863] ACPI: Interpreter enabled
[ 0.224868] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.224872] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.224875] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
[ 0.224884] ACPI: (supports S0 S4 S5)
[ 0.224886] ACPI: Using IOAPIC for interrupt routing
[ 0.225001] HEST: Table parsing has been initialized.
[ 0.225004] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.229482] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.229488] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.229576] acpi PNP0A08:00: PCIe AER handled by firmware
[ 0.229752] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 0.229753] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.229950] PCI host bridge to bus 0000:00
[ 0.229953] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.229956] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.229958] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.229960] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.229961] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfdffffff window]
[ 0.229963] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.229974] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
[ 0.230026] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.230088] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.230136] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.230205] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.230254] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.230317] pci 0000:00:04.0: [8086:340b] type 01 class 0x060400
[ 0.230364] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.230425] pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
[ 0.230472] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.230533] pci 0000:00:06.0: [8086:340d] type 01 class 0x060400
[ 0.230581] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.230643] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.230692] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.230756] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
[ 0.230803] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.230870] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.230963] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.231057] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.231153] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.231198] pci 0000:00:1a.0: reg 0x20: [io 0xec40-0xec5f]
[ 0.231271] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.231316] pci 0000:00:1a.1: reg 0x20: [io 0xec60-0xec7f]
[ 0.231396] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.231423] pci 0000:00:1a.7: reg 0x10: [mem 0xdf0fe000-0xdf0fe3ff]
[ 0.231487] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.231547] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.231591] pci 0000:00:1d.0: reg 0x20: [io 0xec80-0xec9f]
[ 0.231665] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.231709] pci 0000:00:1d.1: reg 0x20: [io 0xeca0-0xecbf]
[ 0.231789] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.231816] pci 0000:00:1d.7: reg 0x10: [mem 0xdf0ff000-0xdf0ff3ff]
[ 0.231880] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.231937] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.232032] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.232114] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.232118] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
[ 0.232121] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 0.232125] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 0.232128] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 0.232195] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
[ 0.232214] pci 0000:00:1f.2: reg 0x10: [io 0xec10-0xec17]
[ 0.232222] pci 0000:00:1f.2: reg 0x14: [io 0xec08-0xec0b]
[ 0.232229] pci 0000:00:1f.2: reg 0x18: [io 0xec18-0xec1f]
[ 0.232236] pci 0000:00:1f.2: reg 0x1c: [io 0xec0c-0xec0f]
[ 0.232243] pci 0000:00:1f.2: reg 0x20: [io 0xec20-0xec2f]
[ 0.232250] pci 0000:00:1f.2: reg 0x24: [io 0xec30-0xec3f]
[ 0.232364] pci 0000:01:00.0: [14e4:1639] type 00 class 0x020000
[ 0.232394] pci 0000:01:00.0: reg 0x10: [mem 0xd6000000-0xd7ffffff 64bit]
[ 0.232463] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.232520] pci 0000:01:00.1: [14e4:1639] type 00 class 0x020000
[ 0.232552] pci 0000:01:00.1: reg 0x10: [mem 0xd8000000-0xd9ffffff 64bit]
[ 0.232620] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 0.238168] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.238175] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff]
[ 0.238245] pci 0000:02:00.0: [14e4:1639] type 00 class 0x020000
[ 0.238275] pci 0000:02:00.0: reg 0x10: [mem 0xda000000-0xdbffffff 64bit]
[ 0.238343] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.238401] pci 0000:02:00.1: [14e4:1639] type 00 class 0x020000
[ 0.238431] pci 0000:02:00.1: reg 0x10: [mem 0xdc000000-0xddffffff 64bit]
[ 0.238499] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.246171] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.246178] pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff]
[ 0.246244] pci 0000:03:00.0: [1000:0079] type 00 class 0x010400
[ 0.246267] pci 0000:03:00.0: reg 0x10: [io 0xfc00-0xfcff]
[ 0.246276] pci 0000:03:00.0: reg 0x14: [mem 0xdf1bc000-0xdf1bffff 64bit]
[ 0.246286] pci 0000:03:00.0: reg 0x1c: [mem 0xdf1c0000-0xdf1fffff 64bit]
[ 0.246298] pci 0000:03:00.0: reg 0x30: [mem 0xdf100000-0xdf13ffff pref]
[ 0.246319] pci 0000:03:00.0: supports D1 D2
[ 0.254175] pci 0000:00:04.0: PCI bridge to [bus 03]
[ 0.254179] pci 0000:00:04.0: bridge window [io 0xf000-0xffff]
[ 0.254184] pci 0000:00:04.0: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.254237] pci 0000:00:05.0: PCI bridge to [bus 04]
[ 0.254283] pci 0000:00:06.0: PCI bridge to [bus 05]
[ 0.254459] pci 0000:06:00.0: [15b3:634a] type 00 class 0x0c0600
[ 0.254853] pci 0000:06:00.0: reg 0x10: [mem 0xdf200000-0xdf2fffff 64bit]
[ 0.255021] pci 0000:06:00.0: reg 0x18: [mem 0xd5000000-0xd57fffff 64bit pref]
[ 0.262226] pci 0000:00:07.0: PCI bridge to [bus 06]
[ 0.262233] pci 0000:00:07.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.262238] pci 0000:00:07.0: bridge window [mem 0xd5000000-0xd57fffff 64bit pref]
[ 0.262281] pci 0000:00:09.0: PCI bridge to [bus 07]
[ 0.262327] pci 0000:08:03.0: [102b:0532] type 00 class 0x030000
[ 0.262348] pci 0000:08:03.0: reg 0x10: [mem 0xd5800000-0xd5ffffff pref]
[ 0.262357] pci 0000:08:03.0: reg 0x14: [mem 0xde7fc000-0xde7fffff]
[ 0.262366] pci 0000:08:03.0: reg 0x18: [mem 0xde800000-0xdeffffff]
[ 0.262397] pci 0000:08:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.262477] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[ 0.262482] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
[ 0.262487] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
[ 0.262489] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.262491] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.262493] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.262495] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfdffffff window] (subtractive decode)
[ 0.262497] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.263764] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 0.263826] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 0.263887] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.263947] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.264007] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.264067] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 0.264129] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.264190] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 0.264243] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.264335] vgaarb: setting as boot device: PCI:0000:08:03.0
[ 0.264337] vgaarb: device added: PCI:0000:08:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.264338] vgaarb: loaded
[ 0.264339] vgaarb: bridge control possible 0000:08:03.0
[ 0.264586] SCSI subsystem initialized
[ 0.264626] libata version 3.00 loaded.
[ 0.264652] ACPI: bus type USB registered
[ 0.264668] usbcore: registered new interface driver usbfs
[ 0.264677] usbcore: registered new interface driver hub
[ 0.264704] usbcore: registered new device driver usb
[ 0.264855] PCI: Using ACPI for IRQ routing
[ 0.270534] PCI: Discovered peer bus fe
[ 0.270535] PCI: root bus fe: using default resources
[ 0.270537] PCI: Probing PCI hardware (bus fe)
[ 0.270565] ACPI: \: failed to evaluate _DSM (0x1001)
[ 0.270566] PCI host bridge to bus 0000:fe
[ 0.270569] pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
[ 0.270571] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
[ 0.270572] pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
[ 0.270575] pci_bus 0000:fe: busn_res: can not insert [bus fe-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.270580] pci 0000:fe:00.0: [8086:2c40] type 00 class 0x060000
[ 0.270624] pci 0000:fe:00.1: [8086:2c01] type 00 class 0x060000
[ 0.270669] pci 0000:fe:02.0: [8086:2c10] type 00 class 0x060000
[ 0.270710] pci 0000:fe:02.1: [8086:2c11] type 00 class 0x060000
[ 0.270754] pci 0000:fe:02.4: [8086:2c14] type 00 class 0x060000
[ 0.270794] pci 0000:fe:02.5: [8086:2c15] type 00 class 0x060000
[ 0.270835] pci 0000:fe:03.0: [8086:2c18] type 00 class 0x060000
[ 0.270876] pci 0000:fe:03.1: [8086:2c19] type 00 class 0x060000
[ 0.270916] pci 0000:fe:03.2: [8086:2c1a] type 00 class 0x060000
[ 0.270957] pci 0000:fe:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.270999] pci 0000:fe:04.0: [8086:2c20] type 00 class 0x060000
[ 0.271040] pci 0000:fe:04.1: [8086:2c21] type 00 class 0x060000
[ 0.271080] pci 0000:fe:04.2: [8086:2c22] type 00 class 0x060000
[ 0.271121] pci 0000:fe:04.3: [8086:2c23] type 00 class 0x060000
[ 0.271163] pci 0000:fe:05.0: [8086:2c28] type 00 class 0x060000
[ 0.271204] pci 0000:fe:05.1: [8086:2c29] type 00 class 0x060000
[ 0.271245] pci 0000:fe:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.271286] pci 0000:fe:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.271329] pci 0000:fe:06.0: [8086:2c30] type 00 class 0x060000
[ 0.271370] pci 0000:fe:06.1: [8086:2c31] type 00 class 0x060000
[ 0.271411] pci 0000:fe:06.2: [8086:2c32] type 00 class 0x060000
[ 0.271452] pci 0000:fe:06.3: [8086:2c33] type 00 class 0x060000
[ 0.271505] pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
[ 0.271508] pci_bus 0000:fe: busn_res: can not insert [bus fe] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.271537] PCI: pci_cache_line_size set to 64 bytes
[ 0.271628] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.271630] e820: reserve RAM buffer [mem 0xcf379000-0xcfffffff]
[ 0.271742] NetLabel: Initializing
[ 0.271743] NetLabel: domain hash size = 128
[ 0.271744] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.271756] NetLabel: unlabeled traffic allowed by default
[ 0.271815] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.271819] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.271823] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.274066] clocksource: Switched to clocksource hpet
[ 0.280257] AppArmor: AppArmor Filesystem Enabled
[ 0.280324] pnp: PnP ACPI init
[ 0.280445] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.280486] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.280705] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.280911] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.281615] system 00:04: [io 0x0800-0x087f] could not be reserved
[ 0.281618] system 00:04: [io 0x0880-0x08ff] could not be reserved
[ 0.281620] system 00:04: [io 0x0900-0x091f] has been reserved
[ 0.281622] system 00:04: [io 0x0920-0x0923] has been reserved
[ 0.281624] system 00:04: [io 0x0924] has been reserved
[ 0.281626] system 00:04: [io 0x0c00-0x0c7f] has been reserved
[ 0.281628] system 00:04: [io 0x0ca0-0x0ca7] has been reserved
[ 0.281630] system 00:04: [io 0x0ca9-0x0cab] has been reserved
[ 0.281632] system 00:04: [io 0x0cad-0x0caf] has been reserved
[ 0.281635] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.281675] pnp 00:05: [irq 0 disabled]
[ 0.281709] system 00:05: [io 0x0ca8] has been reserved
[ 0.281711] system 00:05: [io 0x0cac] has been reserved
[ 0.281714] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
[ 0.282282] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.282286] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.282343] system 00:07: [mem 0xfed90000-0xfed91fff] has been reserved
[ 0.282346] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.282492] pnp: PnP ACPI: found 8 devices
[ 0.288757] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.288809] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
[ 0.288812] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.288816] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff]
[ 0.288822] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.288826] pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff]
[ 0.288832] pci 0000:00:04.0: PCI bridge to [bus 03]
[ 0.288834] pci 0000:00:04.0: bridge window [io 0xf000-0xffff]
[ 0.288838] pci 0000:00:04.0: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.288843] pci 0000:00:05.0: PCI bridge to [bus 04]
[ 0.288851] pci 0000:00:06.0: PCI bridge to [bus 05]
[ 0.288858] pci 0000:00:07.0: PCI bridge to [bus 06]
[ 0.288862] pci 0000:00:07.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.288865] pci 0000:00:07.0: bridge window [mem 0xd5000000-0xd57fffff 64bit pref]
[ 0.288870] pci 0000:00:09.0: PCI bridge to [bus 07]
[ 0.288880] pci 0000:08:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref]
[ 0.288882] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 0.288886] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
[ 0.288889] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
[ 0.288895] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.288897] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.288899] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.288901] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfdffffff window]
[ 0.288903] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.288905] pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd9ffffff]
[ 0.288907] pci_bus 0000:02: resource 1 [mem 0xda000000-0xddffffff]
[ 0.288909] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
[ 0.288911] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
[ 0.288913] pci_bus 0000:06: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.288915] pci_bus 0000:06: resource 2 [mem 0xd5000000-0xd57fffff 64bit pref]
[ 0.288917] pci_bus 0000:08: resource 1 [mem 0xde000000-0xdeffffff]
[ 0.288919] pci_bus 0000:08: resource 2 [mem 0xd5800000-0xd5ffffff 64bit pref]
[ 0.288920] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window]
[ 0.288922] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window]
[ 0.288924] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.288926] pci_bus 0000:08: resource 7 [mem 0xd0000000-0xfdffffff window]
[ 0.288928] pci_bus 0000:08: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.288931] pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
[ 0.288933] pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
[ 0.288973] NET: Registered protocol family 2
[ 0.289227] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.289524] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.289692] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.289733] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.289797] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.289927] NET: Registered protocol family 1
[ 0.307556] pci 0000:08:03.0: Video device with shadowed ROM
[ 0.307582] PCI: CLS 64 bytes, default 64
[ 0.307638] Trying to unpack rootfs image as initramfs...
[ 0.737429] Freeing initrd memory: 24676K (ffff880034fbe000 - ffff8800367d7000)
[ 0.737460] DMAR: Host address width 40
[ 0.737463] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.737479] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020fe
[ 0.737481] DMAR: RMRR base: 0x000000cf4c8000 end: 0x000000cf4dffff
[ 0.737482] DMAR: RMRR base: 0x000000cf4b1000 end: 0x000000cf4bffff
[ 0.737484] DMAR: RMRR base: 0x000000cf4a1000 end: 0x000000cf4a1fff
[ 0.737485] DMAR: RMRR base: 0x000000cf4a3000 end: 0x000000cf4a3fff
[ 0.737486] DMAR: RMRR base: 0x000000cf4a5000 end: 0x000000cf4a5fff
[ 0.737487] DMAR: RMRR base: 0x000000cf4a7000 end: 0x000000cf4a7fff
[ 0.737488] DMAR: RMRR base: 0x000000cf4c0000 end: 0x000000cf4c0fff
[ 0.737489] DMAR: RMRR base: 0x000000cf4c2000 end: 0x000000cf4c2fff
[ 0.737491] DMAR: ATSR flags: 0x0
[ 0.737524] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.737526] software IO TLB [mem 0xcb379000-0xcf379000] (64MB) mapped at [ffff8800cb379000-ffff8800cf378fff]
[ 0.737686] microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x19
[ 0.737693] microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x19
[ 0.737701] microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x19
[ 0.737708] microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x19
[ 0.737714] microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x19
[ 0.737721] microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x19
[ 0.737726] microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x19
[ 0.737732] microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x19
[ 0.737790] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.737874] Scanning for low memory corruption every 60 seconds
[ 0.738547] futex hash table entries: 8192 (order: 7, 524288 bytes)
[ 0.738648] Initialise system trusted keyring
[ 0.738672] audit: initializing netlink subsys (disabled)
[ 0.738688] audit: type=2000 audit(1443095373.628:1): initialized
[ 0.739024] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.740580] zpool: loaded
[ 0.740584] zbud: loaded
[ 0.740764] VFS: Disk quotas dquot_6.6.0
[ 0.740812] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.741342] fuse init (API version 7.23)
[ 0.741496] Key type big_key registered
[ 0.741794] Key type asymmetric registered
[ 0.741796] Asymmetric key parser 'x509' registered
[ 0.741809] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.741858] io scheduler noop registered
[ 0.741860] io scheduler deadline registered (default)
[ 0.741896] io scheduler cfq registered
[ 0.743889] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.743892] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.743894] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.743897] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.743915] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 0.743916] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.743918] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 0.743921] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 0.743937] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 0.743939] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.743942] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 0.743958] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 0.743962] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 0.743978] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 0.743981] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 0.743997] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.743999] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.744002] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 0.744019] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 0.744022] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 0.744029] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.744037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.744074] intel_idle: MWAIT substates: 0x1120
[ 0.744085] intel_idle: v0.4 model 0x1A
[ 0.744086] intel_idle: lapic_timer_reliable_states 0x2
[ 0.744435] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.744439] ACPI: Power Button [PWRF]
Code:
[ 0.744721] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 0.744726] pstore: Registered erst as persistent store backend
[ 0.744860] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 0.744950] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.765362] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.785795] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.787336] Linux agpgart interface v0.103
[ 0.790933] brd: module loaded
[ 0.792501] loop: module loaded
[ 0.792646] ata_piix 0000:00:1f.2: version 2.13
[ 0.792859] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.947019] scsi host0: ata_piix
[ 0.947568] scsi host1: ata_piix
[ 0.947641] ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23
[ 0.947645] ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 23
[ 0.947776] libphy: Fixed MDIO Bus: probed
[ 0.947780] tun: Universal TUN/TAP device driver, 1.6
[ 0.947781] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.947879] PPP generic driver version 2.4.2
[ 0.948177] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.948192] ehci-pci: EHCI PCI platform driver
[ 0.948448] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.948455] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.948466] ehci-pci 0000:00:1a.7: debug port 1
[ 0.952358] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.952368] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdf0fe000
[ 0.962357] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.962428] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.962431] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.962434] usb usb1: Product: EHCI Host Controller
[ 0.962437] usb usb1: Manufacturer: Linux 4.2.0-1-pve ehci_hcd
[ 0.962439] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.962711] hub 1-0:1.0: USB hub found
[ 0.962724] hub 1-0:1.0: 4 ports detected
[ 0.963080] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.963085] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.963095] ehci-pci 0000:00:1d.7: debug port 1
[ 0.966980] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.966989] ehci-pci 0000:00:1d.7: irq 21, io mem 0xdf0ff000
[ 0.978340] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.978406] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.978410] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.978413] usb usb2: Product: EHCI Host Controller
[ 0.978416] usb usb2: Manufacturer: Linux 4.2.0-1-pve ehci_hcd
[ 0.978418] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.978713] hub 2-0:1.0: USB hub found
[ 0.978725] hub 2-0:1.0: 4 ports detected
[ 0.978868] ehci-platform: EHCI generic platform driver
[ 0.978878] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.978882] ohci-pci: OHCI PCI platform driver
[ 0.978896] ohci-platform: OHCI generic platform driver
[ 0.978904] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.979123] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.979129] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.979135] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.979157] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
[ 0.979196] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.979198] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.979199] usb usb3: Product: UHCI Host Controller
[ 0.979201] usb usb3: Manufacturer: Linux 4.2.0-1-pve uhci_hcd
[ 0.979202] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.979499] hub 3-0:1.0: USB hub found
[ 0.979512] hub 3-0:1.0: 2 ports detected
[ 0.979816] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.979822] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.979827] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.979849] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
[ 0.979888] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.979890] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.979891] usb usb4: Product: UHCI Host Controller
[ 0.979893] usb usb4: Manufacturer: Linux 4.2.0-1-pve uhci_hcd
[ 0.979894] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.980177] hub 4-0:1.0: USB hub found
[ 0.980189] hub 4-0:1.0: 2 ports detected
[ 0.980487] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.980493] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.980498] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.980515] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
[ 0.980556] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.980558] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.980559] usb usb5: Product: UHCI Host Controller
[ 0.980561] usb usb5: Manufacturer: Linux 4.2.0-1-pve uhci_hcd
[ 0.980563] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.980844] hub 5-0:1.0: USB hub found
[ 0.980855] hub 5-0:1.0: 2 ports detected
[ 0.981161] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.981166] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.981172] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.981195] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
[ 0.981234] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.981236] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.981238] usb usb6: Product: UHCI Host Controller
[ 0.981239] usb usb6: Manufacturer: Linux 4.2.0-1-pve uhci_hcd
[ 0.981241] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.981525] hub 6-0:1.0: USB hub found
[ 0.981537] hub 6-0:1.0: 2 ports detected
[ 0.981668] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.984696] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.984702] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.985157] mousedev: PS/2 mouse device common for all mice
[ 0.985474] rtc_cmos 00:01: RTC can wake from S4
[ 0.985686] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.985714] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.985729] i2c /dev entries driver
[ 0.985833] device-mapper: uevent: version 1.0.3
[ 0.985984] device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel@redhat.com
[ 0.986033] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.987224] PCCT header not found.
[ 0.987528] NET: Registered protocol family 10
[ 0.987936] NET: Registered protocol family 17
[ 0.987954] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 0.990348] Bridge firewalling registered
[ 0.990357] Key type dns_resolver registered
[ 0.990781] Loading compiled-in X.509 certificates
[ 0.990794] registered taskstats version 1
[ 0.990811] zswap: loading zswap
[ 0.990813] zswap: using zbud pool
[ 0.990817] zswap: using lzo compressor
[ 0.992214] Key type trusted registered
[ 0.994575] Key type encrypted registered
[ 0.994582] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.994586] ima: No TPM chip found, activating TPM-bypass!
[ 0.994610] evm: HMAC attrs: 0x1
[ 0.995029] Magic number: 15:774:833
[ 0.995150] rtc_cmos 00:01: setting system clock to 2015-09-24 11:49:34 UTC (1443095374)
[ 0.995549] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.995550] EDD information not available.
[ 0.995594] PM: Hibernation image not present or could not be loaded.
[ 1.330433] usb 1-3: new high-speed USB device number 3 using ehci-pci
[ 1.418446] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 1.422547] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.446711] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L633J, D250, max UDMA/100
[ 1.462988] usb 1-3: New USB device found, idVendor=0424, idProduct=2514
[ 1.462993] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.463531] hub 1-3:1.0: USB hub found
[ 1.463734] hub 1-3:1.0: 3 ports detected
[ 1.474447] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[ 1.478624] ata1.00: configured for UDMA/100
[ 1.491687] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633J D250 PQ: 0 ANSI: 5
[ 1.520932] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.520936] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.521214] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.521408] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.595572] usb 3-1: New USB device found, idVendor=046d, idProduct=c31c
[ 1.595577] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.595579] usb 3-1: Product: USB Keyboard
[ 1.595582] usb 3-1: Manufacturer: Logitech
[ 1.632572] usb 5-2: New USB device found, idVendor=0624, idProduct=0248
[ 1.632577] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.632580] usb 5-2: Product: USB Composite Device-0
[ 1.632582] usb 5-2: Manufacturer: Avocent
[ 1.632585] usb 5-2: SerialNumber: 20120430
[ 1.734474] tsc: Refined TSC clocksource calibration: 2260.999 MHz
[ 1.734479] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x20974a4d8bb, max_idle_ns: 440795246623 ns
[ 1.974607] ata2: failed to resume link (SControl 0)
[ 1.985270] ata2: SATA link down (SStatus 4 SControl 0)
[ 1.986652] Freeing unused kernel memory: 1472K (ffffffff81d4d000 - ffffffff81ebd000)
[ 1.986654] Write protecting the kernel read-only data: 12288k
[ 1.987972] Freeing unused kernel memory: 164K (ffff8800017d7000 - ffff880001800000)
[ 1.988257] Freeing unused kernel memory: 288K (ffff880001bb8000 - ffff880001c00000)
[ 1.997880] systemd-udevd[156]: starting version 215
[ 1.998135] random: systemd-udevd urandom read with 5 bits of entropy available
[ 2.011476] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014)
[ 2.012140] megasas: 06.807.10.00-rc1
[ 2.012330] bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 32, node addr d4:ae:52:6a:fe:c0
[ 2.012532] megasas: FW now in Ready state
[ 2.012569] megaraid_sas 0000:03:00.0: firmware supports msix : (0)
[ 2.012572] megaraid_sas 0000:03:00.0: current msix/online cpus : (1/8)
[ 2.013234] bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 34, node addr d4:ae:52:6a:fe:c2
[ 2.013474] mlx4_core: Mellanox ConnectX core driver v2.2-1 (Feb, 2014)
[ 2.013493] mlx4_core: Initializing 0000:06:00.0
[ 2.013956] bnx2 0000:02:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 36, node addr d4:ae:52:6a:fe:c4
[ 2.014131] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.015072] bnx2 0000:02:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 38, node addr d4:ae:52:6a:fe:c6
[ 2.058660] megaraid_sas 0000:03:00.0: controller type : MR(512MB)
[ 2.058667] megasas_init_mfi: fw_support_ieee=67108864
[ 2.058670] megasas: INIT adapter done
[ 2.064748] usbcore: registered new interface driver usbhid
[ 2.064753] usbhid: USB HID core driver
[ 2.065373] usbcore: registered new interface driver usbkbd
[ 2.065390] usbcore: registered new interface driver usbmouse
[ 2.065878] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:046D:C31C.0001/input/input3
[ 2.110505] megaraid_sas 0000:03:00.0: pci id : (0x1000)/(0x0079)/(0x1028)/(0x1f17)
[ 2.110507] megaraid_sas 0000:03:00.0: unevenspan support : no
[ 2.110509] megaraid_sas 0000:03:00.0: disable ocr : no
[ 2.110511] megaraid_sas 0000:03:00.0: firmware crash dump : no
[ 2.110512] megaraid_sas 0000:03:00.0: secure jbod : no
[ 2.110516] scsi host2: Avago SAS based MegaRAID driver
[ 2.115889] scsi 2:2:0:0: Direct-Access DELL PERC H700 2.10 PQ: 0 ANSI: 5
[ 2.116123] scsi 2:2:1:0: Direct-Access DELL PERC H700 2.10 PQ: 0 ANSI: 5
[ 2.118713] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1/input0
[ 2.125904] sd 2:2:0:0: [sda] 5857345536 512-byte logical blocks: (2.99 TB/2.72 TiB)
[ 2.125943] sd 2:2:0:0: Attached scsi generic sg1 type 0
[ 2.125987] sd 2:2:0:0: [sda] Write Protect is off
[ 2.125991] sd 2:2:0:0: [sda] Mode Sense: 1f 00 10 08
[ 2.126040] sd 2:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 2.126263] sd 2:2:1:0: Attached scsi generic sg2 type 0
[ 2.126292] sd 2:2:1:0: [sdb] 838860800 512-byte logical blocks: (429 GB/400 GiB)
[ 2.126434] sd 2:2:1:0: [sdb] Write Protect is off
[ 2.126437] sd 2:2:1:0: [sdb] Mode Sense: 1f 00 10 08
[ 2.126517] sd 2:2:1:0: [sdb] Write cache: disabled, read cache: disabled, supports DPO and FUA
[ 2.127434] sd 2:2:1:0: [sdb] Attached SCSI disk
[ 2.130688] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0002/input/input4
[ 2.186676] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1/input1
[ 2.186824] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:0624:0248.0003/input/input5
[ 2.190396] sda: sda1 sda2 sda3
[ 2.190944] sd 2:2:0:0: [sda] Attached SCSI disk
[ 2.242922] hid-generic 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 2.243046] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/0003:0624:0248.0004/input/input6
[ 2.243333] hid-generic 0003:0624:0248.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 2.735219] clocksource: Switched to clocksource tsc
[ 4.402756] mlx4_core 0000:06:00.0: PCIe link speed is 2.5GT/s, device supports 2.5GT/s
[ 4.402759] mlx4_core 0000:06:00.0: PCIe link width is x8, device supports x8
[ 4.756925] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.167675] ERST: NVRAM ERST Log Address Range not implemented yet.
[ 5.373615] systemd-sysv-generator[277]: Ignoring creation of an alias umountiscsi.service for itself
[ 5.393157] random: nonblocking pool is initialized
[ 5.666234] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.896055] systemd-udevd[311]: starting version 215
[ 5.897647] <mlx4_ib> mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v2.2-1 (Feb 2014)
[ 5.897920] <mlx4_ib> mlx4_ib_add: counter index 0 for port 1 allocated 0
[ 5.897922] <mlx4_ib> mlx4_ib_add: counter index 1 for port 2 allocated 0
[ 6.205352] ACPI Error: No handler for Region [IPMI] (ffff88041e8a6240) [IPMI] (20150619/evregion-163)
[ 6.205360] ACPI Error: Region IPMI (ID=7) has no handler (20150619/exfldio-297)
[ 6.205366] ACPI Error: Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88041e8a5b18), AE_NOT_EXIST (20150619/psparse-536)
[ 6.205378] ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88041e8a5a78), AE_NOT_EXIST (20150619/psparse-536)
[ 6.205389] ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20150619/power_meter-755)
[ 6.249396] ipmi message handler version 39.2
[ 6.267272] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.282281] IPMI System Interface driver.
[ 6.282313] ipmi_si: probing via SMBIOS
[ 6.282315] ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
[ 6.282316] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 6.282319] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
[ 6.315370] EDAC MC: Ver: 3.0.0
[ 6.326438] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:fe:03.0 (POLLED)
[ 6.326466] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:fe:03.0 (POLLED)
[ 6.326690] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 6.452518] wmi: Mapper loaded
[ 6.484999] ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
[ 6.485011] ipmi_si ipmi_si.0: IPMI kcs interface initialized
[ 6.498726] IPMI SSIF Interface driver
[ 6.504135] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 6.559560] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.586958] iTCO_vendor_support: vendor-support=0
[ 6.590296] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.590342] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[ 6.590454] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.608573] gpio_ich: GPIO from 451 to 511 on gpio_ich
[ 6.610364] ipmi device interface
[ 6.636869] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 6.761410] Error: Driver 'pcspkr' is already registered, aborting...
[ 6.785071] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 7.006519] zavl: module license 'CDDL' taints kernel.
[ 7.006523] Disabling lock debugging due to kernel taint
[ 7.021706] SPL: Loaded module v0.6.5-348_gd7526b2
[ 7.066558] ZFS: Loaded module v0.6.5.1-29_g3ef747d, ZFS pool version 5000, ZFS filesystem version 5
[ 7.502872] Adding 15728636k swap on /dev/mapper/pve-swap. Priority:-1 extents:1 across:15728636k FS
[ 17.499337] NET: Registered protocol family 38
[ 17.803864] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 25.298300] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 25.587638] Netfilter messages via NETLINK v0.30.
[ 25.653218] device eth0 entered promiscuous mode
[ 25.744991] bnx2 0000:01:00.0 eth0: using MSIX
[ 25.747733] vmbr0: port 1(eth0) entered forwarding state
[ 25.747742] vmbr0: port 1(eth0) entered forwarding state
[ 26.374720] Loading iSCSI transport class v2.0-870.
[ 26.398222] iscsi: registered transport (tcp)
[ 26.424486] iscsi: registered transport (iser)
[ 26.583661] systemd-journald[292]: Received request to flush runtime journal from PID 1
[ 26.656130] vmbr0: port 1(eth0) entered disabled state
[ 26.814530] RPC: Registered named UNIX socket transport module.
[ 26.814534] RPC: Registered udp transport module.
[ 26.814536] RPC: Registered tcp transport module.
[ 26.814538] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 26.844095] FS-Cache: Loaded
[ 26.885574] FS-Cache: Netfs 'nfs' registered for caching
[ 26.929005] audit: type=1400 audit(1443095400.423:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=1321 comm="apparmor_parser"
[ 26.929012] audit: type=1400 audit(1443095400.423:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=1321 comm="apparmor_parser"
[ 26.929016] audit: type=1400 audit(1443095400.423:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=1321 comm="apparmor_parser"
[ 26.929993] audit: type=1400 audit(1443095400.423:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1321 comm="apparmor_parser"
[ 26.945544] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 27.312309] cgroup: new mount options do not match the existing superblock, will be ignored
[ 27.321452] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 28.101355] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 1000 Mbps full duplex
[ 28.101455] vmbr0: port 1(eth0) entered forwarding state
[ 28.101468] vmbr0: port 1(eth0) entered forwarding state
[ 29.491492] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 29.568703] ip_set: protocol 6
[ 33.582766] Fusion MPT base driver 3.04.20
[ 33.582768] Copyright (c) 1999-2008 LSI Corporation
[ 33.594677] Fusion MPT misc device (ioctl) driver 3.04.20
[ 33.594748] mptctl: Registered with Fusion MPT base driver
[ 33.594750] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 33.642888] mpt2sas version 20.100.00.00 loaded
[ 33.668632] mpt3sas version 04.100.00.00 loaded
[ 66.083032] device tap100i0 entered promiscuous mode
[ 66.088253] vmbr0: port 2(tap100i0) entered forwarding state
[ 66.088261] vmbr0: port 2(tap100i0) entered forwarding state
[ 169.321920] IPMI System Interface driver.
[ 169.321963] ipmi_si: probing via SMBIOS
[ 169.321966] ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
[ 169.321968] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 169.321972] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
[ 170.438058] ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
[ 170.438120] ipmi_si ipmi_si.0: IPMI kcs interface initializedI don't see nothing strange.
A new kernel based on 4.2.1 will be available today I think, Dietmar is currently building it.
A new kernel based on 4.2.1 will be available today I think, Dietmar is currently building it.
Hi,
here the 4.2.1 kernel:
http://odisoweb1.odiso.net/pve-kernel-4.2.1-1-pve_4.2.1-14_amd64.deb
(It's not yet in proxmox repo, but it'll be the same)
here the 4.2.1 kernel:
http://odisoweb1.odiso.net/pve-kernel-4.2.1-1-pve_4.2.1-14_amd64.deb
(It's not yet in proxmox repo, but it'll be the same)
No luck... still getting: Guest has not initialized the display (yet)
Code:
root@pve:~# uname -a
Linux pve 4.2.1-1-pve #1 SMP Sat Sep 26 11:44:58 CEST 2015 x86_64 GNU/Linux
root@pve:~# pveversion -v
proxmox-ve: 4.0-13 (running kernel: 4.2.1-1-pve)
pve-manager: 4.0-39 (running version: 4.0-39/ab3cc94a)
pve-kernel-4.2.0-1-pve: 4.2.0-13
pve-kernel-4.2.1-1-pve: 4.2.1-14
lvm2: 2.02.116-pve1
corosync-pve: 2.3.5-1
libqb0: 0.17.2-1
pve-cluster: 4.0-19
qemu-server: 4.0-25
pve-firmware: 1.1-7
libpve-common-perl: 4.0-24
libpve-access-control: 4.0-8
libpve-storage-perl: 4.0-23
pve-libspice-server1: 0.12.5-1
vncterm: 1.2-1
pve-qemu-kvm: 2.4-8
pve-container: 0.9-23
pve-firewall: 2.0-11
pve-ha-manager: 1.0-7
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u1
lxc-pve: 1.1.3-1
lxcfs: 0.9-pve2
cgmanager: 0.37-pve2
criu: 1.6.0-1
zfsutils: 0.6.5-pve1~jessieOk, some other things to try (sorry I can't reproduce, so I can't test myself)
edit
/usr/share/perl5/PVE/QemuServer.pm
comment lines:
push @$cpuFlags , 'hv_vapic' if !$nokvm;
push @$cpuFlags , 'hv_time' if !$nokvm;
push @$cpuFlags , '+kvm_pv_unhalt' if !$nokvm;
push @$cpuFlags , '+kvm_pv_eoi' if !$nokvm;
(this is the new the kvm flags for proxmox 4.0 vs 3.4).
restart pvedaemon
/etc/init.d/pvedaemon restart
then stop/start the vm and see if it's help
edit
/usr/share/perl5/PVE/QemuServer.pm
comment lines:
push @$cpuFlags , 'hv_vapic' if !$nokvm;
push @$cpuFlags , 'hv_time' if !$nokvm;
push @$cpuFlags , '+kvm_pv_unhalt' if !$nokvm;
push @$cpuFlags , '+kvm_pv_eoi' if !$nokvm;
(this is the new the kvm flags for proxmox 4.0 vs 3.4).
restart pvedaemon
/etc/init.d/pvedaemon restart
then stop/start the vm and see if it's help
Downgrading PVE-QEMU-KVM to pve-qemu-kvm_2.3-6_amd64.deb does the trick!
Code:
root@pve:/home# pveversion -v
proxmox-ve: 4.0-13 (running kernel: 4.2.1-1-pve)
pve-manager: 4.0-39 (running version: 4.0-39/ab3cc94a)
pve-kernel-4.2.0-1-pve: 4.2.0-13
[B]pve-kernel-4.2.1-1-pve: 4.2.1-14[/B]
lvm2: 2.02.116-pve1
corosync-pve: 2.3.5-1
libqb0: 0.17.2-1
pve-cluster: 4.0-19
qemu-server: 4.0-25
pve-firmware: 1.1-7
libpve-common-perl: 4.0-24
libpve-access-control: 4.0-8
libpve-storage-perl: 4.0-23
pve-libspice-server1: 0.12.5-1
vncterm: 1.2-1
[B]pve-qemu-kvm: 2.3-6[/B]
pve-container: 0.9-23
pve-firewall: 2.0-11
pve-ha-manager: 1.0-7
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u1
lxc-pve: 1.1.3-1
lxcfs: 0.9-pve2
cgmanager: 0.37-pve2
criu: 1.6.0-1
zfsutils: 0.6.5-pve1~jessieOk, I'm out of idea for now.
I have found a spare r710 in stock, I'll try to do test today or tomorrow.
I have found a spare r710 in stock, I'll try to do test today or tomorrow.
Seems we've sent our messages at the same time.
Upgrading to QEMU 2.4 breaks PVE
With pve-qemu-kvm_2.3-6 everything works as expected
Ok, I'll do tests and try to find what is the problem.
Ok, I'm finally able to reproduce it on a dell r710, with a clean beta2 install.
rollbacking qemu to 2.3 is working.
I'll bissect to find what is the problem.
rollbacking qemu to 2.3 is working.
I'll bissect to find what is the problem.
Hi,
can you try to set
machine: pc-i440fx-2.3
in the vmid.conf file ?
It's working for me (with qemu 2.4), and I have see a similar bug report here:
https://lacyc3.eu/qemu-guest-has-not-initialized-the-display
can you try to set
machine: pc-i440fx-2.3
in the vmid.conf file ?
It's working for me (with qemu 2.4), and I have see a similar bug report here:
https://lacyc3.eu/qemu-guest-has-not-initialized-the-display
Hi,
can you try to set
machine: pc-i440fx-2.3
in the vmid.conf file ?
It's working for me (with qemu 2.4), and I have see a similar bug report here:
https://lacyc3.eu/qemu-guest-has-not-initialized-the-display
Confirm. Works for me as well