PVE 3.2-5
Created a WinXP QEMU with 32 GB qcow2 disk and installed WinXP SP3.
COM3 and COM4 show up with yellow markers in the device manager.
Installing QEMUPCSERIAL.inf to no avail.
e1000 network device in QEMU KVM with PRO2K3XP_32.exe driver loaded.
Network accessible.
Changed the CDROM to other ISOs and works normally.
Changed CDROM to Office 2007.iso (name has space) and CDROM entry vanished from PVE3 GUI.
ISO remains loaded with previous ISO and not new one inside the KVM.
Subsequent efforts:
PVE3 GUI -> WinXP KVM -> Monitor:
Now after the space in the ISO name was removed, the ISO gets loaded into the KVM but the PVE3 GUI still does not show the CDROM device.
Code:
# pveversion -v
proxmox-ve-2.6.32: 3.2-126 (running kernel: 2.6.32-29-pve)
pve-manager: 3.2-4 (running version: 3.2-4/e24a91c1)
pve-kernel-2.6.32-29-pve: 2.6.32-126
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.5-1
pve-cluster: 3.0-12
qemu-server: 3.1-16
pve-firmware: 1.1-3
libpve-common-perl: 3.0-18
libpve-access-control: 3.0-11
libpve-storage-perl: 3.0-19
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-6
vzctl: 4.0-1pve5
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.7-8
ksm-control-daemon: 1.1-1
glusterfs-client: 3.4.2-1
Created a WinXP QEMU with 32 GB qcow2 disk and installed WinXP SP3.
COM3 and COM4 show up with yellow markers in the device manager.
Installing QEMUPCSERIAL.inf to no avail.
e1000 network device in QEMU KVM with PRO2K3XP_32.exe driver loaded.
Network accessible.
Changed the CDROM to other ISOs and works normally.
Changed CDROM to Office 2007.iso (name has space) and CDROM entry vanished from PVE3 GUI.
ISO remains loaded with previous ISO and not new one inside the KVM.
Subsequent efforts:
PVE3 GUI -> WinXP KVM -> Monitor:
Code:
# info block
drive-ide2: /var/lib/vz/template/iso/virtio-win-0.1-74.iso (raw, read-only)
Removable device: not locked, tray closed
# eject drive-ide2
# change drive-ide2 /var/lib/vz/template/iso/Office2007.iso
# info block
drive-ide2: /var/lib/vz/template/iso/Office2007.iso (raw, read-only)
Removable device: not locked, tray closed
drive-ide0: /var/lib/vz/images/102/vm-102-disk-1.qcow2 (qcow2)
Now after the space in the ISO name was removed, the ISO gets loaded into the KVM but the PVE3 GUI still does not show the CDROM device.