PVE 3.1 Install problem - networking issue

[Gerwood]

I'm trying out ProxMox 3.1 VE as I've just discovered it.

I've got an install running but the box is not reachable externally (I.E. from any other machine).

It's running on a 10.1.1.0 network. It appears from the box itself that everything is running, it can see the internet, but seems to be invisible to the rest of the private network.

The vbr0 interface is configured and eth0 isn't.

I also setup a NAT from the public network back to the box and it connected happily both to the web console and ssh. So all in all it looks there is a problem with my network setup, but as I'm not much of a network person I'm not sure where to look for the problem or what might have been setup wrong.

Any suggestions?

Thanks
Gerwood

 

[moarph]

If ssh and the webconsole are visible, it doesn't semm to be a Proxmox-related issue. Could you be more specific about your configuration?

 

[bhennigar]

The vbr0 interface is configured and eth0 isn't.

This is normal.

Are you sure you have the subnet mask the same as the rest of the network?

From the proxmox server, can it ping other devices on the network?

 

[Gerwood]

Thanks for the pointers. It appears that the router I'm using has separated the networks. I can't communicate between the ethernet and the wireless networks. New router so I hadn't realised yet.