Dear All,
I intend to have a proxmox to utilise fibre channel using scst. For this setup, I have 2 physical server installed with proxmox 3.x where each of the server has Qlogic fibre channel card installed and connected to each other.
Below are my references as to get this done:
- http://www.howtoforge.com/how-to-cr...-using-scst-with-qlogic-hba-on-linux-debian-6
- http://thejimmahknows.com/linux-fibre-channel-scsi-target-using-scst/
- http://scst.sourceforge.net/qla2x00t-howto.html
- http://ariasprado.name/2012/04/29/adding-a-fibre-channel-disk-to-a-debian-linux-server.html
However, my test not successful as facing several errors at the building the scst kernel and etc. Thus, need to check if anyone did have this kind of setup and able to make it work?
I intend to have a proxmox to utilise fibre channel using scst. For this setup, I have 2 physical server installed with proxmox 3.x where each of the server has Qlogic fibre channel card installed and connected to each other.
Below are my references as to get this done:
- http://www.howtoforge.com/how-to-cr...-using-scst-with-qlogic-hba-on-linux-debian-6
- http://thejimmahknows.com/linux-fibre-channel-scsi-target-using-scst/
- http://scst.sourceforge.net/qla2x00t-howto.html
- http://ariasprado.name/2012/04/29/adding-a-fibre-channel-disk-to-a-debian-linux-server.html
However, my test not successful as facing several errors at the building the scst kernel and etc. Thus, need to check if anyone did have this kind of setup and able to make it work?