Proxmox VLAN TRUNK specific VLAN not working inside VM if already defined on Proxmox host

[SBUSSER]

Hi,

I have the following problem, I use Proxmox also as NFS server for my ESXi host, for this I have separated the NFS access to different VLANs (1060/1061) on my Proxmox host. All VLAN connections are using the bond0 interface, that is an active-backup 10 GBIT connection.

Now if i try inside a VM to use the trunk interface it is working fine for all vlans except for the vlan 1060 and 1061.
Can you explain why it is not working for the defined vlans inside the vm as trunk port.

Please find attached a printscreen of the network config.

Thank you
Best regards,
Sascha Busser

 

[spirit]

This is because the vlan tag is added/removed when going through bond0.X interface.

you should enable vlanaware bridge, and add vmbr0.1060 && vmbr0.1061 instead bond.X.
like this it should work.

 

[SBUSSER]

Thank you very much, works perfectly