Proxmox Ver 8.x installation on HPE Gen11 server

A

ArmTsi

New Member
Jul 30, 2024
1
0
1
Has anyone installed Proxmox Ver 8.x on an HPE Gen11 server. I have it installed but I can not get the HPE AMS (Agentless Management Service) installed so the fans are screaming at 90%. I tried following the steps provided by HPE support, but I cant even get a version from the Proxmox CLI, need this information to download the correct repository. Any help is appreciated.



https://support.hpe.com/connect/s/s...cec5c1cede0426e&tab=Installation+Instructions
 
Bash: 
wget -O - https://downloads.linux.hpe.com/SDR/repo/mcp/GPG-KEY-mcp |  gpg --dearmor -o /usr/share/keyrings/hpe-mcp-archive-keyring.gpg

echo "deb [signed-by=/usr/share/keyrings/hpe-mcp-archive-keyring.gpg] http://downloads.linux.hpe.com/SDR/repo/mcp bookworm/current non-free" >> /etc/apt/sources.list.d/hpe.list


then run "apt update && apt install amsd " .

It is working fine by my side.
 
Last edited:
  • Like
Reactions: IsThisThingOn
aufwiz said:
Bash: 
wget -O - https://downloads.linux.hpe.com/SDR/repo/mcp/GPG-KEY-mcp |  gpg --dearmor -o /usr/share/keyrings/hpe-mcp-archive-keyring.gpg

echo "deb [signed-by=/usr/share/keyrings/hpe-mcp-archive-keyring.gpg] http://downloads.linux.hpe.com/SDR/repo/mcp bookworm/current non-free" >> /etc/apt/sources.list.d/hpe.list


then run "apt update && apt install asmd " .

It is working fine by my side.
Click to expand...
After I run the wget it prompts me to enter a file name no matter what i enter as the file name it still gives me the "E: Unable to locate package asmd" error after running the apt install command.
 
Last edited:
Amsd installed and running but fans are not ramping down even after restart.
root@pvehp:~# systemctl status amsd
● amsd.service - Agentless Management Service daemon
Loaded: loaded (/lib/systemd/system/amsd.service; enabled; preset: enabled)
Active: active (running) since Thu 2025-04-24 01:40:38 EDT; 10min ago
Main PID: 1050 (amsd)
Tasks: 1 (limit: 18931)
Memory: 2.5M
CPU: 307ms
CGroup: /system.slice/amsd.service
└─1050 /sbin/amsd -f

Apr 24 01:40:37 pvehp systemd[1]: Starting amsd.service - Agentless Management Service daemon...
Apr 24 01:40:38 pvehp amsd[1050]: amsd Started . .
Apr 24 01:40:38 pvehp systemd[1]: Started amsd.service - Agentless Management Service daemon.
 
Last edited:
silent_arrow said:
Amsd installed and running but fans are not ramping down even after restart.
root@pvehp:~# systemctl status amsd
● amsd.service - Agentless Management Service daemon
Loaded: loaded (/lib/systemd/system/amsd.service; enabled; preset: enabled)
Active: active (running) since Thu 2025-04-24 01:40:38 EDT; 10min ago
Main PID: 1050 (amsd)
Tasks: 1 (limit: 18931)
Memory: 2.5M
CPU: 307ms
CGroup: /system.slice/amsd.service
└─1050 /sbin/amsd -f

Apr 24 01:40:37 pvehp systemd[1]: Starting amsd.service - Agentless Management Service daemon...
Apr 24 01:40:38 pvehp amsd[1050]: amsd Started . .
Apr 24 01:40:38 pvehp systemd[1]: Started amsd.service - Agentless Management Service daemon.
Click to expand...
Did you even get this worked out?
 
silent_arrow said:
I gave up running Linux and installed windows server while only using hp parts :(.
Click to expand...
I am getting close to making the same choice, I was really ready to try proxmox in production but its not looking good. I do have a support ticket open with HP hoping they can tell me something
 
You must log in or register to reply here.
Top Bottom