proxmox-ve uninstalled after upgrade to 7

[JosueD]

I recently upgraded to pve7. But now:
web gui is not available.
port 8006 is closed
proxmox-ve is not installed
'apt install proxmox-ve' fails

 

[RokModTwo]

What version of PVE were you on prior to the upgrade?

Possible that your network card interface name got renamed (debian 11 upgrade)

If you can console-access PVE, have a look at /etc/network/interfaces file, vs what interfaces you have showing in ip a

You may need to revise the interface name old -> new and then update the vmbr1 section with the linked interface, then restart the node.

 

[JosueD]

What version of PVE were you on prior to the upgrade?

Possible that your network card interface name got renamed (debian 11 upgrade)

If you can console-access PVE, have a look at /etc/network/interfaces file, vs what interfaces you have showing in ip a

You may need to revise the interface name old -> new and then update the vmbr1 section with the linked interface, then restart the node.

my network interface is properly named and linked.
I went from prox 6.x to 7.x
my issue is that proxmox-ve was somehow uninstalled along with all its commands.

 

[JosueD]

root@node0:~# apt-get install proxmox-ve
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
ceph-common : Depends: python3-cephfs (= 15.2.15-pve1~bpo10) but it is not going to be installed
Depends: python3-rados (= 15.2.15-pve1~bpo10) but it is not going to be installed
Depends: python3-rbd (= 15.2.15-pve1~bpo10) but it is not going to be installed
Depends: python3-rgw (= 15.2.15-pve1~bpo10) but it is not going to be installed
Depends: python3.7:any but it is not installable
E: Unable to correct problems, you have held broken packages.

This is what I get from trying to install proxmox-ve

 

[vesalius]

What version of 6 did you upgrade from? Did you follow the guide linked below and use pve6to7 --full check for potential issues before the upgrade?

https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0