I updated all my proxmox ve hosts in a cluster that night from 2.1 to 2.2.
After the update one of my nodes begun to fall into general protection fault right or after few minutes after boot.
Here is a screen
http://s18.postimage.org/ew7hvrrg9/image.jpg
The two other nodes of the cluster seem to be OK.
I tried to reinstall the proxmox ve 2.2 from the CD. Right after the install it seemed to be OK. I ran "apt-get update" and "apt-get dist-upgrade".
Then I rebooted and tried to ssh to the host. And again the host got into general protection fault.
What to do?
Should I install proxmox ve from the CD and leave it without update? May be I should wait for another (more stable update)?
Then another question: will I be able to add that node ( 2.2 from CD without the latest update) to my cluster where two other nodes were already updated to the latest version?
In addition:
pveversion -v from the problem host (not updated):
root@srv-bld-a06:~# pveversion -v
pve-manager: 2.2-24 (pve-manager/2.2/7f9cfa4c)
running kernel: 2.6.32-16-pve
proxmox-ve-2.6.32: 2.2-80
pve-kernel-2.6.32-16-pve: 2.6.32-80
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.4-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.93-1
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.9-1
pve-cluster: 1.0-28
qemu-server: 2.0-62
pve-firmware: 1.0-21
libpve-common-perl: 1.0-36
libpve-access-control: 1.0-25
libpve-storage-perl: 2.0-34
vncterm: 1.0-3
vzctl: 4.0-1pve2
vzprocps: 2.0.11-2
vzquota: 3.1-1
pve-qemu-kvm: 1.2-7
ksm-control-daemon: 1.1-1
pveversion -v from its neighbour (which works ok and is in a cluster)
root@srv-bld-a05:~# pveversion -v
pve-manager: 2.2-31 (pve-manager/2.2/e94e95e9)
running kernel: 2.6.32-16-pve
proxmox-ve-2.6.32: 2.2-82
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-16-pve: 2.6.32-82
pve-kernel-2.6.32-12-pve: 2.6.32-68
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.4-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.93-2
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.9-1
pve-cluster: 1.0-33
qemu-server: 2.0-69
pve-firmware: 1.0-21
libpve-common-perl: 1.0-39
libpve-access-control: 1.0-25
libpve-storage-perl: 2.0-36
vncterm: 1.0-3
vzctl: 4.0-1pve2
vzprocps: 2.0.11-2
vzquota: 3.1-1
pve-qemu-kvm: 1.2-7
ksm-control-daemon: 1.1-1
After the update one of my nodes begun to fall into general protection fault right or after few minutes after boot.
Here is a screen
http://s18.postimage.org/ew7hvrrg9/image.jpg
The two other nodes of the cluster seem to be OK.
I tried to reinstall the proxmox ve 2.2 from the CD. Right after the install it seemed to be OK. I ran "apt-get update" and "apt-get dist-upgrade".
Then I rebooted and tried to ssh to the host. And again the host got into general protection fault.
What to do?
Should I install proxmox ve from the CD and leave it without update? May be I should wait for another (more stable update)?
Then another question: will I be able to add that node ( 2.2 from CD without the latest update) to my cluster where two other nodes were already updated to the latest version?
In addition:
pveversion -v from the problem host (not updated):
root@srv-bld-a06:~# pveversion -v
pve-manager: 2.2-24 (pve-manager/2.2/7f9cfa4c)
running kernel: 2.6.32-16-pve
proxmox-ve-2.6.32: 2.2-80
pve-kernel-2.6.32-16-pve: 2.6.32-80
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.4-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.93-1
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.9-1
pve-cluster: 1.0-28
qemu-server: 2.0-62
pve-firmware: 1.0-21
libpve-common-perl: 1.0-36
libpve-access-control: 1.0-25
libpve-storage-perl: 2.0-34
vncterm: 1.0-3
vzctl: 4.0-1pve2
vzprocps: 2.0.11-2
vzquota: 3.1-1
pve-qemu-kvm: 1.2-7
ksm-control-daemon: 1.1-1
pveversion -v from its neighbour (which works ok and is in a cluster)
root@srv-bld-a05:~# pveversion -v
pve-manager: 2.2-31 (pve-manager/2.2/e94e95e9)
running kernel: 2.6.32-16-pve
proxmox-ve-2.6.32: 2.2-82
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-16-pve: 2.6.32-82
pve-kernel-2.6.32-12-pve: 2.6.32-68
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.4-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.93-2
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.9-1
pve-cluster: 1.0-33
qemu-server: 2.0-69
pve-firmware: 1.0-21
libpve-common-perl: 1.0-39
libpve-access-control: 1.0-25
libpve-storage-perl: 2.0-36
vncterm: 1.0-3
vzctl: 4.0-1pve2
vzprocps: 2.0.11-2
vzquota: 3.1-1
pve-qemu-kvm: 1.2-7
ksm-control-daemon: 1.1-1
Last edited: