Proxmox Support

[LnxBil]

Wow, just shows what a noob i am

You're working on changing it!

sdf 8:80 0 111.8G 0 disk
├─sdf1 8:81 0 1007K 0 part
├─sdf2 8:82 0 512M 0 part
└─sdf3 8:83 0 111.3G 0 part

This could be the "old" ZFS.

so i boot in " rescue mode " with the Old 12GB Hard Drive connected including the 4 x ZFS Raid Drives ?

Yes, then try to import the old pool via:

zpool import -R /rpool rpool

Does that work?

 

[LnxBil]

so i boot in " rescue mode " with the Old 12GB Hard Drive connected including the 4 x ZFS Raid Drives ? What i mean by this is that i boot from a USB Flash Drive in " rescue mode " Correct?

Yes, e.g. PVE Installer or other ZFS-capable rescue system

 

[LnxBil]

Please post zpool status -v (in CODE-Tags)

 

[LnxBil]

So, your system is working from the old SSD and you could start everything?

Next would be to add a new 120G disk and follow the link in comment#2

 

[Dunuin]

When

cannot import " rpool "
name " rpool " already exists

When booting from USB stick or the old 120GB SSD? If your old system SSD is now booting again, remove the USB stick, put in the new 120GB SSD and try to boot from the old 120GB SSD.
Then you can wipe the new 120GB SSD and follow the wiki on how to add the new SSD replacing the failed EVO so you get a working mirror again.

 

[LnxBil]

cannot import " rpool "
name " rpool " already exists

We're spinning in a circle.

Did you plug in the new disk and reboot? Why is there a zpool called rpool on the disk? I thought it was installed with LVM?

First, we should go back to the state in which the rpool was mounted and you said that it booted. Then we first copy off the /etc/pve files, they should be mounted and we have the config and the data on the pool so that we can try to fix the machine. If the files are not mounted, please copy off the file /var/lib/pve-cluster/config.db.

 

[Dunuin]

So whats your lsblk and ls -la /dev/disk/by-id/ output when booting from that 120GB SSD that is now booting?

 

[wifipilot]

So whats your lsblk and ls -la /dev/disk/by-id/ output when booting from that 120GB SSD that is now booting?

Dunuin, LnxBill and all the other people who helped.

What can i say.

Thank you guys, thank you very very much

All is working and functioning

Wow, what a learning curve but there is Absolutely No Way i could have done it without your help and assistance

Proxmox IS the Best!!