[SOLVED] Proxmox startet nach herrunterfahren neu

[simstra19958]

Hallo zusammen,

bei mir startet Proxmox neu wenn ich denn Herrunterfahren Button klicke.

hier mal das Syslog:

Sep 07 13:15:36 homelab systemd[1]: systemd-poweroff.service: Succeeded.
Sep 07 13:15:36 homelab systemd[1]: Finished Power-Off.
Sep 07 13:15:36 homelab systemd[1]: Reached target Power-Off.
Sep 07 13:15:36 homelab systemd[1]: Shutting down.
Sep 07 13:15:36 homelab systemd-shutdown: Syncing filesystems and block devices.
Sep 07 13:15:36 homelab systemd-shutdown: Sending SIGTERM to remaining processes...
Sep 07 13:15:36 homelab systemd-journald[575]: Journal stopped
-- Reboot --
Sep 07 13:16:03 homelab kernel: Linux version 5.15.53-1-pve (build@proxmox) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PVE 5.15.53-1 (Fri, 26 Aug 2022 16:53:52 +0200) ()
Sep 07 13:16:03 homelab kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.53-1-pve root=/dev/mapper/pve-root ro quiet
Sep 07 13:16:03 homelab kernel: KERNEL supported cpus:
Sep 07 13:16:03 homelab kernel:   Intel GenuineIntel
Sep 07 13:16:03 homelab kernel:   AMD AuthenticAMD
Sep 07 13:16:03 homelab kernel:   Hygon HygonGenuine
Sep 07 13:16:03 homelab kernel:   Centaur CentaurHauls
Sep 07 13:16:03 homelab kernel:   zhaoxin   Shanghai 
Sep 07 13:16:03 homelab kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
Sep 07 13:16:03 homelab kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
Sep 07 13:16:03 homelab kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
Sep 07 13:16:03 homelab kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
Sep 07 13:16:03 homelab kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
Sep 07 13:16:03 homelab kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
Sep 07 13:16:03 homelab kernel: x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
Sep 07 13:16:03 homelab kernel: x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
Sep 07 13:16:03 homelab kernel: x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
Sep 07 13:16:03 homelab kernel: signal: max sigframe size: 2032
Sep 07 13:16:03 homelab kernel: BIOS-provided physical RAM map:
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x0000000000100000-0x000000006cf53fff] usable
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x000000006cf54000-0x000000006f057fff] reserved
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x000000006f058000-0x000000006f0d9fff] ACPI data
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x000000006f0da000-0x000000006f0e0fff] ACPI NVS
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x000000006f0e1000-0x000000006f0e1fff] reserved
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x000000006f0e2000-0x000000006f1b3fff] ACPI NVS
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x000000006f1b4000-0x000000006fba2fff] reserved
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x000000006fba3000-0x000000006fc4dfff] type 20
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x000000006fc4e000-0x000000006fc4efff] usable
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x000000006fc4f000-0x000000007cffffff] reserved
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Sep 07 13:16:03 homelab kernel: BIOS-e820: [mem 0x0000000100000000-0x0000001080ffffff] usable
Sep 07 13:16:03 homelab kernel: NX (Execute Disable) protection: active
Sep 07 13:16:03 homelab kernel: efi: EFI v2.70 by American Megatrends
Sep 07 13:16:03 homelab kernel: efi: ACPI=0x6f119000 ACPI 2.0=0x6f119014 TPMFinalLog=0x6f121000 SMBIOS=0x6f9df000 SMBIOS 3.0=0x6f9de000 MEMATTR=0x66a81018 ESRT=0x68fe8c98
Sep 07 13:16:03 homelab kernel: secureboot: Secure boot could not be determined (mode 0)
Sep 07 13:16:03 homelab kernel: SMBIOS 3.3.0 present.
Sep 07 13:16:03 homelab kernel: DMI: Intel(R) Client Systems NUC10i7FNH/NUC10i7FNB, BIOS FNCML357.0052.2021.0409.1144 04/09/2021
Sep 07 13:16:03 homelab kernel: tsc: Detected 1600.000 MHz processor
Sep 07 13:16:03 homelab kernel: tsc: Detected 1599.960 MHz TSC
Sep 07 13:16:03 homelab kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Sep 07 13:16:03 homelab kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Sep 07 13:16:03 homelab kernel: last_pfn = 0x1081000 max_arch_pfn = 0x400000000
Sep 07 13:16:03 homelab kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
Sep 07 13:16:03 homelab kernel: last_pfn = 0x6fc4f max_arch_pfn = 0x400000000
Sep 07 13:16:03 homelab kernel: esrt: Reserving ESRT space from 0x0000000068fe8c98 to 0x0000000068fe8cd0.
Sep 07 13:16:03 homelab kernel: e820: update [mem 0x68fe8000-0x68fe8fff] usable ==> reserved
Sep 07 13:16:03 homelab kernel: Using GB pages for direct mapping

Irgendwelche Ideen woran das liegen könnte.

P.S.: WoL ist bei mir aus.

Beste Grüße
Simon

 

[simstra19958]

Hallo zusammen,

kurzes Updates was ich bis jetzt schon probiert habe.

1. Alle USB Festplatten ausgesteckt = selbes ergbnis
2. Lan Kabel ausgesteckt = selbes ergenis

Was noch in Planung ist:
BIOS anschauen
BIOS updaten.

Ansonsten bin Ich der Meinung das es am Kernel Update liegt da ja zuvor alles Funktioniert hat.

Beste Grüße
Simon

 

[ph0x]

Was macht der Node, wenn du es über die Konsole versuchst?

shutdown -hP now

 

[simstra19958]

das gleiche verhalten fährtrunter und dann sofort wieder hoch

 

[ph0x]

Ich würde auf eine Einstellung in BIOS oder auf einen Hardware-Defekt tippen. Schau dir mal an, was das BIOS zu den Power-Optionen zu sagen hat.

 

[simstra19958]

er bleibt wieder aus , was geholfen hat was ich jetzt leider nicht auf jeden fall war wol im bios aktviert habe ich dann deaktviert und ein bios update war auch noch verfügbar

 

[ph0x]

Irgendwas wird's gewesen sein.

 

[simstra19958]

ja denke ich auch