Question: How do I run a OpenVZ container in a Proxmox VM in the IPCop ORANGE network?
Physical Hardware:
HP Microserver
5 NICs
Software:
Proxmox 1.9
IPCop 2.0.0 running in a KVM instance
with the NICs setup as:
eth0->vmbr0 - Red network - DHCP
eth1->vmbr1 - Blue network - 192.168.50.x
eth2->vmbr2 - Orange network - 192.168.100.x
eth3->vmbr3 - Green network - 192.168.10.x
eth4 is static IP at 192.168.10.5
Everything is working for the RED, GREEN and BLUE networks.
Now, I would like to create a new Proxmox OpenVZ container (say a Wordpress container).
How do I create that with the IP address 192.168.100.50 and connect it to the
ORANGE network (vmbr2) so access to it is controlled by IPCop's firewall?
Physical Hardware:
HP Microserver
5 NICs
Software:
Proxmox 1.9
IPCop 2.0.0 running in a KVM instance
with the NICs setup as:
eth0->vmbr0 - Red network - DHCP
eth1->vmbr1 - Blue network - 192.168.50.x
eth2->vmbr2 - Orange network - 192.168.100.x
eth3->vmbr3 - Green network - 192.168.10.x
eth4 is static IP at 192.168.10.5
Everything is working for the RED, GREEN and BLUE networks.
Now, I would like to create a new Proxmox OpenVZ container (say a Wordpress container).
How do I create that with the IP address 192.168.100.50 and connect it to the
ORANGE network (vmbr2) so access to it is controlled by IPCop's firewall?