Proxmox not booting anymore - newbie needs help

[markustmaier]

Hi there,

I created a new VM with windows 11 to play around with his. Everything worked fine until the night. I think after doing the nightly backups my proxmox crashed because of full SSD or partion.

At booting I get the error
"Check of pool pve/data failed (status:1). Manual repair required!
/dev/mapper/pve-root: UNEXPECTED INCOSISTENCY; RUN fsck MANUALLY.
fsck exited with status code 4
The root filesystem on /dev/mapper/pve-root requires a manual fsck

Running fsck shows "unable to set superblock flags on /dev/mapper/pve-root"

Can someone please help me to get my installation runnning again? I'm an newbie and tried some things but they all not worked.

Thank you very much!

 

[krikey]

If you can access a command line you could try removing the backup files?

If you cannot boot into a terminal or command line, you could try mounting the drive (assuming its a single drive and not a RAID) into another PC and then removing some files manually?

 

[markustmaier]

I can access the command line and I have also a live ubuntu where I can see all backup files. But this drive or partition has free space of 5 GB.

How can I check free space of /dev/mapper/pve-root?

Any other suggestion to fix the error? Its a single drive, no raid.

Thank you.

 

[krikey]

You could try running fsck to repair the file system in single user mode, but be aware that you may need to rely on restoring VMs/LXCs from backups as this may not work or you may have lost data:

• Restart the system and during the boot process, access the GRUB menu.
• Select the entry for your current kernel but do not press Enter.
• Press e to edit the boot parameters.
• Find the line that starts with linux and add single or init=/bin/bash at the end of the line to boot into single-user mode or a rescue shell.
• Press Ctrl + X to boot.

Once you are in single-user mode or rescue shell, run the following command to check and repair the file system:

fsck /dev/mapper/pve-root

Now reboot your server and see if it starts up successfully.

 

[markustmaier]

Ok, thank you. I tried this.

The systems boots in shell with the errors already mentioned above (unexpected inconsistency, run fsck manually, status code 4, and so on).

fsck /dev/mapper/pve-root
Then I get error, superblock needs_recovery flag is clear, but journal has data. Run journal anyway?
-> I type "y"
fsck.ext4: unable to set superblock flags on /dev/mapper/pve-root
/dev/mapper/pve-root: ***************** WARNING: Filesystem still has errors *********************

Rebooting does no solve the issue.

Any other ideas?

 

[krikey]

Did you boot into single user mode, because if you didn't and you tried to run fsck on a mounted /dev/mapper/pve-root thi might cause more issues?

You could try booting from a LIVE CD and then running fsck on the problematic disk?

 

[markustmaier]

I tried both version you mentioned above with single and init. But maybe I have done it wrong? Im an absolute newbie, sorry

The shell and messages looked always the same. With the added commands or without.

 

[RonaldoJr]

Estou com o mesmo problema, meu disco encheu, porém eu limpei os dados, mas após reiniciar fica a mesma mensagem **** AVISO: o sistema de arquivos ainda tem erros ***
.Se meu disco deu problema, com um linux live consigo copiar as VMs e restaurar em outro local?
listando em dev/mapper/ existe a pve-vm--100--disk--0 e pve-vm-101-disk-0