[SOLVED] Proxmox Network does not work for Linux, but Windows

Discussion in 'Proxmox VE: Networking and Firewall' started by lucienn3, Jan 11, 2019.

  1. lucienn3

    lucienn3 New Member

    Joined:
    Jan 11, 2019
    Messages:
    2
    Likes Received:
    0
    Hello,

    I currently have some server at Hetzner with one single IP and a Subnet. I am trying to make one CT available from the outside. When I try to make a Windows 10 VM available it works without any problem, however, if I try the Linux container it does not want to work. Here are the settings:

    HOST:
    Code:
    root@bravo ~ # cat /etc/network/interfaces
    # network interface settings; autogenerated
    # Please do NOT modify this file directly, unless you know what
    # you're doing.
    #
    # If you want to manage part of the network configuration manually,
    # please utilize the 'source' or 'source-directory' directives to do
    # so.
    # PVE will preserve these directives, but will NOT its network
    # configuration from sourced files, so do not attempt to move any of
    # the PVE managed interfaces into external files!
    
    source /etc/network/interfaces.d/*
    
    auto lo
    iface lo inet loopback
    
    iface lo inet6 loopback
    
    auto eno1
    iface eno1 inet static
            address  X.X.140.81
            netmask  255.255.255.224
            gateway  X.X.140.65
            up route add -net X.X.140.64 netmask 255.255.255.224 gw X.X.140.65 dev eno1
    # route X.X.140.64/27 via X.X.140.65
    
    iface eno1 inet6 static
            address  XXXX
            netmask  64
            gateway  fe80::1
    
    auto vmbr0
    iface vmbr0 inet static
            address  X.X.201.176
            netmask  255.255.255.240
            bridge-ports none
            bridge-stp off
            bridge-fd 0
    
    CT:
    2019-01-11 16_17_01-VNC Command Terminal - noVNC.png

    I would appreciate the help.

    Best Regards
    Lucienn3
     
  2. lucienn3

    lucienn3 New Member

    Joined:
    Jan 11, 2019
    Messages:
    2
    Likes Received:
    0
    I fixed it by using X.X.201.190 for the Proxmox server and then use X.X.201.177 for the CT.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice