PROXMOX / MSA 2050

[stylus]

I am trying to add my SAN bay to my proxmox, do you have a procedure ?


I need to add an initiator on the MSA :


Unable to find the WWN identifier on the machine.....
pveversion
pve-manager/7.4-3/9002ab8a (running kernel: 5.15.83-1-pve)

lspci -nn |egrep -i "fibre|hba|ethernet"
03:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
03:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
03:00.2 Ethernet controller [0200]: QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
03:00.3 Ethernet controller [0200]: QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
27:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
27:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
45:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
45:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
45:00.2 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
45:00.3 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)


lspci -v -s 03:00.3
03:00.3 Ethernet controller: QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE Controller (rev 02)
Subsystem: QLogic Corp. 10GbE 4p SFP+ QL41134HLCU-HC Adapter
Physical Slot: 1
Flags: bus master, fast devsel, latency 0, IRQ 451, NUMA node 0, IOMMU group 63
Memory at a9000000 (64-bit, prefetchable) [size=128K]
Memory at a7000000 (64-bit, prefetchable) [size=8M]
Memory at a9080000 (64-bit, prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [b0] MSI-X: Enable+ Count=65 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [168] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [178] Power Budgeting <?>
Capabilities: [188] Alternative Routing-ID Interpretation (ARI)
Capabilities: [1f8] Transaction Processing Hints
Capabilities: [28c] Vendor Specific Information: ID=0002 Rev=3 Len=100 <?>
Capabilities: [38c] Vendor Specific Information: ID=0001 Rev=1 Len=038 <?>
Capabilities: [3d0] Vendor Specific Information: ID=0003 Rev=1 Len=054 <?>
Capabilities: [424] Physical Resizable BAR
Kernel driver in use: qede
Kernel modules: qede

 

[bbgeek17]

Assuming you are using FC, since you are inquiring about WWN, the following article should help:
https://www.thegeekdiary.com/how-to-identify-the-hba-cardsports-and-wwn-in-rheloel/
This was found via "debian find wwn" google search.

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox