Thanks for the advice, I was able to get the Connect-X3 NIC working:
Code:
root@pve-02:~# mlxconfig -d /dev/mst/mt4103_pciconf0 q
Device #1:
----------
Device type: ConnectX3Pro
Device: /dev/mst/mt4103_pciconf0
Configurations: Next Boot
SRIOV_EN True(1)
NUM_OF_VFS 16
WOL_MAGIC_EN_P2 True(1)
LINK_TYPE_P1 VPI(3)
PHY_TYPE_P1 XFI(2)
XFI_MODE_P1 _10G(0)
FORCE_MODE_P1 False(0)
LINK_TYPE_P2 VPI(3)
PHY_TYPE_P2 XFI(2)
XFI_MODE_P2 _10G(0)
FORCE_MODE_P2 False(0)
LOG_BAR_SIZE 5
BOOT_PKEY_P1 0
BOOT_PKEY_P2 0
BOOT_OPTION_ROM_EN_P1 True(1)
BOOT_VLAN_EN_P1 False(0)
BOOT_RETRY_CNT_P1 0
LEGACY_BOOT_PROTOCOL_P1 PXE(1)
BOOT_VLAN_P1 1
BOOT_OPTION_ROM_EN_P2 True(1)
BOOT_VLAN_EN_P2 False(0)
BOOT_RETRY_CNT_P2 0
LEGACY_BOOT_PROTOCOL_P2 PXE(1)
BOOT_VLAN_P2 1
IP_VER_P1 IPv4(0)
IP_VER_P2 IPv4(0)
CQ_TIMESTAMP True(1)
STEER_FORCE_VLAN False(0)