Proxmox install not booting , please help

MZero

New Member
Aug 5, 2023
6
0
1
I have proxmox install ruining but due to some resources issue it crashed and never went up again , the issue is that the bootable ssd not showing at all or detected by the bios only another NVME which has LVM storage data only . the bios settings has no problem and detecting any other bootable media .

The stata controller showing the ssd just fine but seems bios not recognizing it even changed back and forth between legacy & uefi .

I followed the guide here but no luck i get multiple errors during mounting or going to rescue mode . only way to go debug but not able to complete due errors as shown attached

https://pve.proxmox.com/wiki/Recover_From_Grub_Failure


is there any possiblity to get it ruining agian , i would be thankful
 

Attachments

  • 1000029324-0.jpg
    1000029324-0.jpg
    591.5 KB · Views: 14
  • 1000029324-1.jpg
    1000029324-1.jpg
    606.7 KB · Views: 14
  • 1000029324-2.jpg
    1000029324-2.jpg
    629.6 KB · Views: 12
  • 1000029324-3.jpg
    1000029324-3.jpg
    523 KB · Views: 13
  • 1000029324-4.jpg
    1000029324-4.jpg
    628.4 KB · Views: 13
  • 1000029324-5.jpg
    1000029324-5.jpg
    718.8 KB · Views: 15
Looks like your disk or a cable connecting the disk is failing. I would try swapping the SATA cable and try another port on the motherboard. Another option would be to try and read the disk from a different computer.