Hello,
after I had a lot of problems with the cluster today, i wanted to get back to the old configuration. I think I made somewhere a mistake.
The gui is not loading. In the access.log there is the following error:
root@pam [28/Sep/2016:19:59:40 +0200] "GET /api2/json/nodes/ns30457xx/status HTTP/1.1" 200 604
root@pam [28/Sep/2016:19:59:41 +0200] "GET /api2/json/nodes/ns30457xx/status HTTP/1.1" 200 605
root@pam [28/Sep/2016:19:59:42 +0200] "GET /api2/json/cluster/tasks HTTP/1.1" 200 11
root@pam [28/Sep/2016:19:59:43 +0200] "GET /api2/json/nodes/ns30457xx/status HTTP/1.1" 200 595
oot@pam [28/Sep/2016:19:59:44 +0200] "GET /api2/json/nodes/ns30457xx/status HTTP/1.1" 200 576
root@pam [28/Sep/2016:19:59:45 +0200] "GET /api2/json/cluster/tasks HTTP/1.1" 200 11
root@pam [28/Sep/2016:19:59:45 +0200] "GET /api2/json/cluster/resources HTTP/1.1" 200 154
root@pam [28/Sep/2016:19:59:45 +0200] "GET /api2/json/nodes/ns30457xx/status HTTP/1.1" 200 594
(xx are to numbers)
/etc/hosts:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
149.x.x.74 ns3045733 pvelocalhost
149.x.x.197 host8
149.x.x.199 host14
149.x.x.200 host15
# The following lines are desirable for IPv6 capable hosts
#(added automatically by netbase upgrade)
#::1 ip6-localhost ip6-loopback
#feo0::0 ip6-localnet
#ff00::0 ip6-mcastprefix
#ff02::1 ip6-allnodes
#ff02::2 ip6-allrouters
#ff02::3 ip6-allhosts
corosync is running
pvecm status
Quorum information
------------------
Date: Wed Sep 28 22:49:12 2016
Quorum provider: corosync_votequorum
Nodes: 1
Node ID: 0x00000001
Ring ID: 28
Quorate: Yes
Votequorum information
----------------------
Expected votes: 1
Highest expected: 1
Total votes: 1
Quorum: 1
Flags: Quorate
Membership information
----------------------
Nodeid Votes Name
0x00000001 1 149.x.x.74 (local)
service pveproxy status
● pveproxy.service
Loaded: masked (/dev/null)
Active: inactive (dead)
Warning: Unit file changed on disk, 'systemctl daemon-reload' recommended.
-> daemon-reload does not fix the problem.
Network is accessable, i can also start vms (qm start)
pve-cluster restart does also not solve the problem.
Any ideas??
Regards
Fount the command in another post, but also doesnt help:
systemctl enable pveproxy.service
Synchronizing state for pveproxy.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d pveproxy defaults
insserv: Service pvedaemon has to be enabled to start service pveproxy
insserv: exiting now!
update-rc.d: error: insserv rejected the script header
*** Error in `systemctl': double free or corruption (fasttop): 0x0000555995abc9f0 ***
Abgebrochen
root@ns3045733:~# systemctl start pveproxy.service Failed to start pveproxy.service: Unit pveproxy.service is masked.
after I had a lot of problems with the cluster today, i wanted to get back to the old configuration. I think I made somewhere a mistake.
The gui is not loading. In the access.log there is the following error:
root@pam [28/Sep/2016:19:59:40 +0200] "GET /api2/json/nodes/ns30457xx/status HTTP/1.1" 200 604
root@pam [28/Sep/2016:19:59:41 +0200] "GET /api2/json/nodes/ns30457xx/status HTTP/1.1" 200 605
root@pam [28/Sep/2016:19:59:42 +0200] "GET /api2/json/cluster/tasks HTTP/1.1" 200 11
root@pam [28/Sep/2016:19:59:43 +0200] "GET /api2/json/nodes/ns30457xx/status HTTP/1.1" 200 595
oot@pam [28/Sep/2016:19:59:44 +0200] "GET /api2/json/nodes/ns30457xx/status HTTP/1.1" 200 576
root@pam [28/Sep/2016:19:59:45 +0200] "GET /api2/json/cluster/tasks HTTP/1.1" 200 11
root@pam [28/Sep/2016:19:59:45 +0200] "GET /api2/json/cluster/resources HTTP/1.1" 200 154
root@pam [28/Sep/2016:19:59:45 +0200] "GET /api2/json/nodes/ns30457xx/status HTTP/1.1" 200 594
(xx are to numbers)
/etc/hosts:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
149.x.x.74 ns3045733 pvelocalhost
149.x.x.197 host8
149.x.x.199 host14
149.x.x.200 host15
# The following lines are desirable for IPv6 capable hosts
#(added automatically by netbase upgrade)
#::1 ip6-localhost ip6-loopback
#feo0::0 ip6-localnet
#ff00::0 ip6-mcastprefix
#ff02::1 ip6-allnodes
#ff02::2 ip6-allrouters
#ff02::3 ip6-allhosts
corosync is running
pvecm status
Quorum information
------------------
Date: Wed Sep 28 22:49:12 2016
Quorum provider: corosync_votequorum
Nodes: 1
Node ID: 0x00000001
Ring ID: 28
Quorate: Yes
Votequorum information
----------------------
Expected votes: 1
Highest expected: 1
Total votes: 1
Quorum: 1
Flags: Quorate
Membership information
----------------------
Nodeid Votes Name
0x00000001 1 149.x.x.74 (local)
service pveproxy status
● pveproxy.service
Loaded: masked (/dev/null)
Active: inactive (dead)
Warning: Unit file changed on disk, 'systemctl daemon-reload' recommended.
-> daemon-reload does not fix the problem.
Network is accessable, i can also start vms (qm start)
pve-cluster restart does also not solve the problem.
Any ideas??
Regards
Fount the command in another post, but also doesnt help:
systemctl enable pveproxy.service
Synchronizing state for pveproxy.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d pveproxy defaults
insserv: Service pvedaemon has to be enabled to start service pveproxy
insserv: exiting now!
update-rc.d: error: insserv rejected the script header
*** Error in `systemctl': double free or corruption (fasttop): 0x0000555995abc9f0 ***
Abgebrochen
root@ns3045733:~# systemctl start pveproxy.service Failed to start pveproxy.service: Unit pveproxy.service is masked.
Last edited:
