Proxmox does not see the discs

[gusto]

proxmox-ve: 7.1-1 (running kernel: 5.13.19-6-pve)
pve-manager: 7.1-11 (running version: 7.1-11/8d529482)
pve-kernel-helper: 7.1-13
pve-kernel-5.13: 7.1-9
pve-kernel-5.13.19-6-pve: 5.13.19-14
pve-kernel-5.13.19-5-pve: 5.13.19-13
pve-kernel-5.13.19-4-pve: 5.13.19-9
pve-kernel-5.13.19-2-pve: 5.13.19-4
ceph-fuse: 15.2.15-pve1
corosync: 3.1.5-pve2
criu: 3.15-1+pve-1
glusterfs-client: 9.2-1
ifupdown2: 3.1.0-1+pmx3
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-1
libknet1: 1.22-pve2
libproxmox-acme-perl: 1.4.1
libproxmox-backup-qemu0: 1.2.0-1
libpve-access-control: 7.1-6
libpve-apiclient-perl: 3.2-1
libpve-common-perl: 7.1-5
libpve-guest-common-perl: 4.1-1
libpve-http-server-perl: 4.1-1
libpve-storage-perl: 7.1-1
libspice-server1: 0.14.3-2.1
lvm2: 2.03.11-2.1
lxc-pve: 4.0.11-1
lxcfs: 4.0.11-pve1
novnc-pve: 1.3.0-2
proxmox-backup-client: 2.1.5-1
proxmox-backup-file-restore: 2.1.5-1
proxmox-mini-journalreader: 1.3-1
proxmox-widget-toolkit: 3.4-7
pve-cluster: 7.1-3
pve-container: 4.1-4
pve-docs: 7.1-2
pve-edk2-firmware: 3.20210831-2
pve-firewall: 4.2-5
pve-firmware: 3.3-6
pve-ha-manager: 3.3-3
pve-i18n: 2.6-2
pve-qemu-kvm: 6.1.1-2
pve-xtermjs: 4.16.0-1
qemu-server: 7.1-4
smartmontools: 7.2-1
spiceterm: 3.2-2
swtpm: 0.7.1~bpo11+1
vncterm: 1.7-1
zfsutils-linux: 2.1.2-pve1

HW
Odroid H2
2x SSD Samsung SSD 870
1x Converter Hard Drive NGFF NVME M-Key PCI Express to SATA 3.0 Extension Card JMB585 2280 6Gbps 5 Ports Adapter
2x SSD WDC WDS100T2B0A


2x SSDs Samsung SSD 870 are in internal SATA ports on Odroid H2
2x SSD WDC WDS100T2B0A are connected via Converter Hard Drive.

fdisk -l sees only 2x SSDs in internal sata ports (/dev/sda and /dev/sdb)

Disk /dev/sdb: 232.89 GiB, 250059350016 bytes, 488397168 sectors
Disk model: Samsung SSD 870
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: XX-EED0-4E8B-B308-21E7A5CBEE62

Device       Start       End   Sectors   Size Type
/dev/sdb1       34      2047      2014  1007K BIOS boot
/dev/sdb2     2048   1050623   1048576   512M EFI System
/dev/sdb3  1050624 488397134 487346511 232.4G Solaris /usr & Apple ZFS


Disk /dev/sda: 232.89 GiB, 250059350016 bytes, 488397168 sectors
Disk model: Samsung SSD 870
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: XX-F35D-441D-8F6E-37E628E94AC3

Device       Start       End   Sectors   Size Type
/dev/sda1       34      2047      2014  1007K BIOS boot
/dev/sda2     2048   1050623   1048576   512M EFI System
/dev/sda3  1050624 488397134 487346511 232.4G Solaris /usr & Apple ZFS


Disk /dev/zd0: 8 GiB, 8589934592 bytes, 16777216 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 8192 bytes
I/O size (minimum/optimal): 8192 bytes / 8192 bytes
Disklabel type: dos
Disk identifier: 0x950c4b12

Device     Boot   Start      End  Sectors  Size Id Type
/dev/zd0p1 *       2048   999423   997376  487M 83 Linux
/dev/zd0p2      1001470 16775167 15773698  7.5G  5 Extended
/dev/zd0p5      1001472 16775167 15773696  7.5G 8e Linux LVM

Partition 2 does not start on physical sector boundary.


Disk /dev/zd16: 10 GiB, 10737418240 bytes, 20971520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 8192 bytes
I/O size (minimum/optimal): 8192 bytes / 8192 bytes
Disklabel type: dos
Disk identifier: 0x90909090

Device      Boot Start      End  Sectors Size Id Type
/dev/zd16p1 *       64 20971518 20971455  10G a5 FreeBSD

 dmesg | grep scsi
[    2.103841] scsi host0: ahci
[    2.104309] scsi host1: ahci
[    2.105638] scsi host2: ahci
[    2.105867] scsi host3: ahci
[    2.106088] scsi host4: ahci
[    2.108469] scsi host5: ahci
[    2.112124] scsi host6: ahci
[    2.592558] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 870  1B6Q PQ: 0 ANSI: 5
[    2.592912] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.593320] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 870  1B6Q PQ: 0 ANSI: 5
[    2.593629] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    3.389371] scsi 4:0:0:0: Direct-Access     ATA      WDC  WDS100T2B0A 00WD PQ: 0 ANSI: 5
[    3.389773] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    9.513230] scsi 5:0:0:0: Direct-Access     ATA      WDC  WDS100T2B0A 20WD PQ: 0 ANSI: 5
[    9.513619] sd 5:0:0:0: Attached scsi generic sg3 type 0
[   66.842502] iscsi: registered transport (tcp)
[   66.899528] iscsi: registered transport (iser)

I set up the bios correctly.
Do I need any driver for nvme to sata converter?

 

[bobmc]

That adapter will not work as it doesn't convert sata to nvme - it only converts normal sata to m.2sata

 

[leesteken]

According to this JMB585 supports (is supported by?) Linux, but I don't know which driver or kernel version. Do you see the device in lspci -k?

 

[gusto]

00:00.0 Host bridge: Intel Corporation Gemini Lake Host Bridge (rev 03)
        DeviceName: Onboard - Other
        Subsystem: Intel Corporation Gemini Lake Host Bridge
00:02.0 VGA compatible controller: Intel Corporation GeminiLake [UHD Graphics 600] (rev 03)
        DeviceName: Onboard - Video
        Subsystem: Intel Corporation UHD Graphics 605
        Kernel driver in use: i915
        Kernel modules: i915
00:0e.0 Audio device: Intel Corporation Celeron/Pentium Silver Processor High Definition Audio (rev 03)
        DeviceName: Onboard - Sound
        Subsystem: Intel Corporation Celeron/Pentium Silver Processor High Definition Audio
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel, snd_soc_skl, snd_sof_pci_intel_apl
00:0f.0 Communication controller: Intel Corporation Celeron/Pentium Silver Processor Trusted Execution Engine Interface (rev 03)
        DeviceName: Onboard - Other
        Subsystem: Intel Corporation Celeron/Pentium Silver Processor Trusted Execution Engine Interface
        Kernel driver in use: mei_me
        Kernel modules: mei_me
00:12.0 SATA controller: Intel Corporation Celeron/Pentium Silver Processor SATA Controller (rev 03)
        DeviceName: Onboard - SATA
        Subsystem: Intel Corporation Device 7270
        Kernel driver in use: ahci
        Kernel modules: ahci
00:13.0 PCI bridge: Intel Corporation Gemini Lake PCI Express Root Port (rev f3)
        Kernel driver in use: pcieport
00:14.0 PCI bridge: Intel Corporation Gemini Lake PCI Express Root Port (rev f3)
        Kernel driver in use: pcieport
00:14.1 PCI bridge: Intel Corporation Gemini Lake PCI Express Root Port (rev f3)
        Kernel driver in use: pcieport
00:15.0 USB controller: Intel Corporation Celeron/Pentium Silver Processor USB 3.0 xHCI Controller (rev 03)
        DeviceName: Onboard - Other
        Subsystem: Intel Corporation Device 7270
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
00:17.0 Signal processing controller: Intel Corporation Device 31b4 (rev 03)
        DeviceName: Onboard - Other
        Subsystem: Intel Corporation Device 7270
        Kernel driver in use: intel-lpss
        Kernel modules: intel_lpss_pci
00:17.1 Signal processing controller: Intel Corporation Device 31b6 (rev 03)
        DeviceName: Onboard - Other
        Subsystem: Intel Corporation Device 7270
        Kernel driver in use: intel-lpss
        Kernel modules: intel_lpss_pci
00:17.2 Signal processing controller: Intel Corporation Device 31b8 (rev 03)
        DeviceName: Onboard - Other
        Subsystem: Intel Corporation Device 7270
        Kernel driver in use: intel-lpss
        Kernel modules: intel_lpss_pci
00:17.3 Signal processing controller: Intel Corporation Device 31ba (rev 03)
        DeviceName: Onboard - Other
        Subsystem: Intel Corporation Device 7270
        Kernel driver in use: intel-lpss
        Kernel modules: intel_lpss_pci
00:1c.0 SD Host controller: Intel Corporation Celeron/Pentium Silver Processor SDA Standard Compliant SD Host Controller (rev 03)
        DeviceName: Onboard - Other
        Subsystem: Intel Corporation Celeron/Pentium Silver Processor SDA Standard Compliant SD Host Controller
        Kernel driver in use: sdhci-pci
        Kernel modules: sdhci_pci
00:1f.0 ISA bridge: Intel Corporation Celeron/Pentium Silver Processor LPC Controller (rev 03)
        DeviceName: Onboard - Other
        Subsystem: Intel Corporation Device 7270
00:1f.1 SMBus: Intel Corporation Celeron/Pentium Silver Processor Gaussian Mixture Model (rev 03)
        DeviceName: Onboard - Other
        Subsystem: Intel Corporation Celeron/Pentium Silver Processor Gaussian Mixture Model
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801
01:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller (rev ff)
        Kernel driver in use: ahci
        Kernel modules: ahci
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
        Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
        Kernel driver in use: r8169
        Kernel modules: r8169
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
        Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
        Kernel driver in use: r8169
        Kernel modules: r8169

Looks like the driver is here

01:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller (rev ff)
        Kernel driver in use: ahci
        Kernel modules: ahci