I'm having issues with my Proxmox Server, I have a Dell Precision T7820 with a LSISAS9207-8E SAS Controller connected to a NetApp DS4246. Previously, when I would power cycle the Proxmox Host, my ZFS pool on the Disk Shelf would be recognized no problem, but now the ZFS pool is not recognized and I can't run zpool clear Tank1, I have to disconnect the DAC from the disk shelf for the pool to be recognized. I have another set of IOM6 controllers for the NetApp and another DAC cable at home I could try to use to troubleshoot. Does anyone know why?
Proxmox Connection to Disk Shelf
- Thread starter neuterscooter
- Start date
I have a DS4243 but with HB-SBB2-E601-COMP https://web.archive.org/web/2019092...drive-shelf-into-a-vendor-generic-jbod-array/
If the disks are in standby/spindown, they spin up at the reboot and this takes a good minute,would take maybe two with your 48 disks. I confused that with the DS4486.
These netapps have a bug with 6 years uptime, then they need a reboot.
If the disks are in standby/spindown, they spin up at the reboot and this takes a good minute,
These netapps have a bug with 6 years uptime, then they need a reboot.
Last edited: