ProxMoX and WHMCS

[pasbag]

Hi all.
I install WHMCS 6.2 on my server and use add on of ProxMox v4.x of ModuleGarden.
so when i create a new machine in KVM template, i can create remotely VM but when i click on the Novnc button in the ClientArea and web admin, the new window has not any thing and without error and is blank.
So i check the console log on below web of ProxMox and i can see this error:

Task viewer: VM/CT 110 - Console

OutputStatus

Stop
nc6: connection timed out
TASK ERROR: command '/bin/nc6 -l -p 5900 -w 10 -e '/usr/sbin/qm vncproxy 110 2>/dev/null'' failed: exit code 1

 

[mswpt]

Any news on this? I have the same problem if I connect to noVNC via API (WHMCS <> ModulesGarden AddOn)...

I tried to run the command on the node-shell:

pvesh create /nodes/apollo/qemu/100/vncproxy

The output:

nc6: connection timed out
command '/bin/nc6 -l -p 5900 -w 10 -e '/usr/sbin/qm vncproxy 100 2>/dev/null'' failed: exit code 1
200 OK
{
"cert" : "-----BEGIN CERTIFICATE-----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\n9V1hNTytUITe37e6ujVt3OZuwbXEAkVzkIUR\n-----END CERTIFICATE-----\n",
"port" : "5900",
"ticket" : "PVEVNC:57DBE7BC::hBCiGGxuPBEmKfR3HfhE7l1AKTSweZRiwkXWRSOiHCC/OsXW7n4JQnPrCKNrbf82mqGLWZw45yQpKaa9R+hcWggzxuwOi2YsN/IYVGhkQIUEIkhxMSPIstkJepPThW5dLVS4uYYtcRw9xUsv54QigesPaIWp+96MA6DjCogY9tnpnG+6Yc/rSdpPHjXpfjy2OmriYbN91J4c8zE5QUQ6YdpseApq/6wEJMaNnLYDMvrFLWbpwsAzieraSszlMgpWsKYFka48O1uxzstQDl41LCSIjZxYIbnoOoMY2ogXGe2JBwlOaiIL2kprTLSJfQ0p8Dw7Xi4s2Z3bY2Tt2CNAQA==",
"upid" : "UPID:apollo:00001B87:0003F67A:57DBE7BC:vncproxy:100:root@pam:",
"user" : "root@pam"
}

I don´t understand why it happened... there is no firewall on/infront of the involved server.
The problem exists on all nodes at two clusters.

From the Proxmox webinterface noVNC works without any problems ... via API there is only the timeout

Any idea...?

Proxmox:

Kernel Version Linux 4.4.16-1-pve #1 SMP Wed Aug 31 15:14:37 CEST 2016
PVE Manager Version pve-manager/4.2-18/158720b9

 

[starnetwork]

Hi,
recommend you to contact Modulesgarden regarding to that issue

 

[mswpt]

very helpful...!

That´s not a Modulesgarden issue. The problem also exists direct on the nodes, without any external applications ... and that not only with my cluster - that seems to be a API related problem.

Just search for "nc6" here in the forum or "nc6 failed: exit code 1" at google.

 

[dcsapak]

the new window has not any thing and without error and is blank.

could you maybe post a screenshot ?