Hello, my Proxmox server doesnt shows me my disks anymore in the GUI, I wanted to make a few Container Backups...
The Gui says:
And the CLI says:
The Gui says:
And the CLI says:
root@proxmox:~# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931.5G 0 disk
|-sda1 8:1 0 8G 0 part
|-sda2 8:2 0 2G 0 part
`-sda3 8:3 0 921.3G 0 part
sdb 8:16 0 931.5G 0 disk
root@proxmox:~# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.36.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
The device contains 'ext4' signature and it will be removed by a write command. See fdisk(8) man page and --wipe option for more details.
Device does not contain a recognized partition table.
Created a new DOS disklabel with disk identifier 0x052d93b7.
Command (m for help): p
Disk /dev/sdb: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: YongzhenWeiye
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x052d93b7
Command (m for help): d
No partition is defined yet!
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
root@proxmox:~# pvesm status
Name Type Status Total Used Available %
local dir active 98497780 86082680 7365552 87.40%
local-lvm lvmthin active 833396736 353193536 480203199 42.38%