Hi guys,
I've created 3 new Proxmox nodes on 3 several servers.
So first of all every server got his own IP and also its own storage etc.
All 3 nodes got their own hardware RAID with 2 RAID1 HDDs (2x2HDDs) and while installing I've created ZFS 0 on all 3 nodes.
After booting everythin was okay on all 3 single nodes, no problems so far.
So then I've created on one of the nodes (Proxmox12) a new cluster and this worked quite fine till then.
Next I joined another node (Proxmox10) into the cluster and then the problem appeared. It only shows that local-zfs isn't available or better said: "status: unknown" on Proxmox10 -> see file attached.
After that I joined the 3rd node (Proxmox11) into the cluster and everything was fine on Proxmox11 and Proxmox12 but on Proxmox10 status of local-zfs is still unknown.
I've also rebooted all 3 nodes but nothing changed. On Proxmox11 and Proxmox12 I can easily create VMs and CTs on their local-zfs but not on Proxmox10.
Would be nice if someone could help me
I've created 3 new Proxmox nodes on 3 several servers.
So first of all every server got his own IP and also its own storage etc.
All 3 nodes got their own hardware RAID with 2 RAID1 HDDs (2x2HDDs) and while installing I've created ZFS 0 on all 3 nodes.
After booting everythin was okay on all 3 single nodes, no problems so far.
So then I've created on one of the nodes (Proxmox12) a new cluster and this worked quite fine till then.
Next I joined another node (Proxmox10) into the cluster and then the problem appeared. It only shows that local-zfs isn't available or better said: "status: unknown" on Proxmox10 -> see file attached.
After that I joined the 3rd node (Proxmox11) into the cluster and everything was fine on Proxmox11 and Proxmox12 but on Proxmox10 status of local-zfs is still unknown.
I've also rebooted all 3 nodes but nothing changed. On Proxmox11 and Proxmox12 I can easily create VMs and CTs on their local-zfs but not on Proxmox10.
Would be nice if someone could help me