All screenshots can be found here:https://imgur.com/a/MCVsS
So I did a basic install of the latest 5.1 ISO available for download (also did on 5.0, same issues) on my Dell R710, all default settings. It's being installed on a 500GB 850 EVO, attached to a PERC 6/i. It is a regular virtual drive created in the RAID card config with a fast initialization. The proxmox installation completes without any problems; afterwards there is a recurring error message saying: "umount: can't umount /mnt: Device or resource busy"
After rebooting into Proxmox, several errors are thrown, as are shown in the first two screenshots. Then after that, it prompts for a login; however, there is no header telling me what IP to navigate to for web GUI. I can ping the IP no problem, but I am unable to connect to the web GUI (trying https://192.168.1.201:8006). I am using Gbe 1 of 4 on the back of the server, if that makes a difference.
If anyone has any ideas, please let me know. It would be much appreciated!
Thanks,
Michael
So I did a basic install of the latest 5.1 ISO available for download (also did on 5.0, same issues) on my Dell R710, all default settings. It's being installed on a 500GB 850 EVO, attached to a PERC 6/i. It is a regular virtual drive created in the RAID card config with a fast initialization. The proxmox installation completes without any problems; afterwards there is a recurring error message saying: "umount: can't umount /mnt: Device or resource busy"
After rebooting into Proxmox, several errors are thrown, as are shown in the first two screenshots. Then after that, it prompts for a login; however, there is no header telling me what IP to navigate to for web GUI. I can ping the IP no problem, but I am unable to connect to the web GUI (trying https://192.168.1.201:8006). I am using Gbe 1 of 4 on the back of the server, if that makes a difference.
If anyone has any ideas, please let me know. It would be much appreciated!
Thanks,
Michael