hello,
I have a HP DL585 g7, installed proxmox3.2
trying to insert ixgbe driver but failed again:
2.6.32-29 could not detect my HP 560 sfp 10G adaptor, I am very sure it has been enable on RBSU(bios).
after switch the kernel to 3.10.0-4, my card could be detect, but hang on switching to clocksource tsc.
and then, I restart the server and boot from centos-6.5-livecd, the 10g nic work flawless.
so the problem would be 2.6.32-29 kernel, I would like to stick with kernel-2.6.32-29 on production environment.
any suggestion will welcome.
I have a HP DL585 g7, installed proxmox3.2
Code:
root@prmx1:~# pveversion -v
proxmox-ve-2.6.32: 3.2-126 (running kernel: 2.6.32-29-pve)
pve-manager: 3.2-4 (running version: 3.2-4/e24a91c1)
pve-kernel-3.10.0-4-pve: 3.10.0-17
pve-kernel-2.6.32-29-pve: 2.6.32-126
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.5-1
pve-cluster: 3.0-12
qemu-server: 3.1-16
pve-firmware: 1.1-3
libpve-common-perl: 3.0-18
libpve-access-control: 3.0-11
libpve-storage-perl: 3.0-19
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-6
vzctl: 4.0-1pve5
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.7-8
ksm-control-daemon: 1.1-1
glusterfs-client: 3.4.2-1trying to insert ixgbe driver but failed again:
Code:
root@prmx1:~# modprobe ixgbe
root@prmx1:~# dmesg | less
...
Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1
Copyright (c) 1999-2013 Intel Corporation.
root@prmx1:~# ifconfig eth4
eth4: error fetching interface information: Device not found2.6.32-29 could not detect my HP 560 sfp 10G adaptor, I am very sure it has been enable on RBSU(bios).
after switch the kernel to 3.10.0-4, my card could be detect, but hang on switching to clocksource tsc.
and then, I restart the server and boot from centos-6.5-livecd, the 10g nic work flawless.
so the problem would be 2.6.32-29 kernel, I would like to stick with kernel-2.6.32-29 on production environment.
any suggestion will welcome.
