Proxmox 2.0 Clustering and HP Blade 460c G6

  • Thread starter Thread starter nciriaco
  • Start date Start date
N

nciriaco

Guest
Hi all!
I´m working with Proxmox 2.0 on two HP BL460 and the cluster comes and goes. At first, I can join the nodes, few minutes later they work separately without communication between each other.
I´ve tried with disabling multicast filtering on HP Blade Network Card with no result :(

Any ideas??

Working with 2 different servers (IBM and NEC), jonied by a crossover ethernet cable, it works perfectly!

Regards,

Juan Ignacio
 
Although I could join both nodes and I see them on "green light", when I try to access to the second node, it refuses my connection to IP:8006 port.
When trying to re-start apache by /etc/init.d/apache2 start on the second node, I see:


Starting web server: apache2Syntax error on line 13 of /etc/apache2/sites-enabled/pve-redirect.conf:
SSLCertificateFile: file '/etc/pve/local/pve-ssl.pem' does not exist or is empty
Action 'start' failed.
The Apache error log may have more information.
failed!

Any ideas ?

Thanks again!


nciriaco said:
Ok, I´ll try. Hope it works!
Thanks!
Click to expand...
 
is this a new installation from 2.1 ISO?
 
As I remember, since I´ve tested Proxmox 2.0 on these servers I can make the cluster and then it stops working either by becoming "red" or not connecting to port 8006 on the 2nd node....
With 1.9 it works great... but functionalities added to Proxmox 2 and the end user interface are a good reason to move on!

nciriaco said:
Yes. A clean one.
Click to expand...
 
Yes. I´ve followed what you told me.

Here it is /etc/hosts

NODE1:
127.0.0.1 localhost.localdomain localhost
172.16.200.1 virtual1.unipe.edu.ar virtual1 pvelocalhost
172.16.200.2 virtual2.unipe.edu.ar virtual2

NODE2:
127.0.0.1 localhost.localdomain localhost
172.16.200.2 virtual2.unipe.edu.ar virtual2 pvelocalhost
172.16.200.1 virtual1.unipe.edu.ar virtual1

--------------------------------------------------------------------
pveversion -v NODE 1
--------------------------------------------------------------------
pveversion -v
pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a)
running kernel: 2.6.32-11-pve
proxmox-ve-2.6.32: 2.0-66
pve-kernel-2.6.32-11-pve: 2.6.32-66
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.3-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.8-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.7-2
pve-cluster: 1.0-26
qemu-server: 2.0-39
pve-firmware: 1.0-15
libpve-common-perl: 1.0-27
libpve-access-control: 1.0-21
libpve-storage-perl: 2.0-18
vncterm: 1.0-2
vzctl: 3.0.30-2pve5
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.0-9
ksm-control-daemon: 1.1-1

--------------------------------------------------------------------
pveversion -v NODE 2
--------------------------------------------------------------------
pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a)
running kernel: 2.6.32-11-pve
proxmox-ve-2.6.32: 2.0-66
pve-kernel-2.6.32-11-pve: 2.6.32-66
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.3-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.8-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.7-2
pve-cluster: 1.0-26
qemu-server: 2.0-39
pve-firmware: 1.0-15
libpve-common-perl: 1.0-27
libpve-access-control: 1.0-21
libpve-storage-perl: 2.0-18
vncterm: 1.0-2
vzctl: 3.0.30-2pve5
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.0-9
ksm-control-daemon: 1.1-1




Thank you :)






tom said:
did you followed this guide?
http://pve.proxmox.com/wiki/Multicast_notes#Use_unicast_instead_of_multicast

please post your /etc/hosts:

Code: 
cat /etc/hosts

and your version:

Code: 
pveversion -v
Click to expand...
 
To generate the missing certificate run (on the node you cannot start apache):

# pvecm updatecerts

Then try to restart apache.
 
THANK YOU!
You can mark it as solved....!! I will use this topic URL to provide a solution to another user who asked the same question that I did.

Regards, and again THANKS!



dietmar said:
To generate the missing certificate run (on the node you cannot start apache):

# pvecm updatecerts

Then try to restart apache.
Click to expand...
 
You must log in or register to reply here.
Top Bottom