Proxmon + pfsense(trunk)

[Glimmetion]

Hi

I am running pfsense on proxmon and I am trying to enable vlans on pfsense but it appears clients on DMZ and IOT vlan are not able to get up ip via pfsense dhcp server. Vlans are 10( lan), 20 (DMZ) and 30 (IOT).

Proxmon is connected via trunk port to Cisco switch and accessible on vlan vmbr0.10(vlan 10). All vlans are allowed by default on the trunk. Configuration of pfsense NIC on proxmon attached. I have two physical NICs one of which (vmbr0) is used as LAN and vmbr1 as WAN. Pfsense is configured to use vlans and dhcp is enabled on each vlan

(Pfsense Hardware checksum offload disabled )

Proxmon version 7.2.11

 

[vesalius]

Show us your /etc/network/interfaces from the the proxmox host?

 

[Glimmetion]

Show us your /etc/network/interfaces from the the proxmox host?

# network interface settings; autogenerated
# Please do NOT modify this file directly, unless y
ou know what
# you're doing.
#
# If you want to manage parts of the network config
uration manually,
# please utilize the 'source' or 'source-directory'
directives to do
# so.
# PVE will preserve these directives, but will NOT
read its network
# configuration from sourced files, so do not attem
pt to move any of
# the PVE managed interfaces into external files!

auto lo
iface lo inet loopback

auto eno1
iface eno1 inet manual

auto enx58ef68e3f38c
iface enx58ef68e3f38c inet manual

auto vmbr0
iface vmbr0 inet manual
bridge-ports eno1
bridge-stp off
bridge-fd 0
bridge-vlan-aware yes
bridge-vids 2-4094

auto vmbr0.10
iface vmbr0.10 inet static
address 10.x.x.x/24
gateway 10.x.x.x

auto vmbr1
iface vmbr1 inet manual
bridge-ports enx58ef68e3f38c
bridge-stp off
bridge-fd 0

 

[vesalius]

I See nothing wrong in the Proxmox setup or in the parts of the pfSense setup shown.

can you ping the pfSense gateway address for either vlans 20 or 30 from the switch? Have you double checked that the switch is allowing connected devices in via untagged ports as appropriate for vlan 20 & 30?

 

[Glimmetion]

It was strange indeed. I reboot proxmon and pfsense along with the switch and everything is working fine now

Thanks for the help

 

[vesalius]

Glad it’s working. Not the first time I’ve heard a reboot of either Proxmox or the managed switch getting things working as expected when changes correctly made do not work on the fly.