Hello,
I had Dell PowerEdge 630 and I had proxmo 7.4 with kernel 5.15.116-1-pve. All works fine.
Now I upgraded whole system to new debian and proxmox 8.
Unfortunately, not everything works as it should. When I run with the new 6.2 kernel then I have a kernel panic.
When I run it on the old kernel (but on a new system), everything starts correctly.
I am attaching a picture of the error.
All upgrade was without any error/warning.
And info...
I had Dell PowerEdge 630 and I had proxmo 7.4 with kernel 5.15.116-1-pve. All works fine.
Now I upgraded whole system to new debian and proxmox 8.
Unfortunately, not everything works as it should. When I run with the new 6.2 kernel then I have a kernel panic.
When I run it on the old kernel (but on a new system), everything starts correctly.
I am attaching a picture of the error.
All upgrade was without any error/warning.
And info...
Code:
# pveversion -v
proxmox-ve: 8.0.2 (running kernel: 5.15.116-1-pve)
pve-manager: 8.0.4 (running version: 8.0.4/d258a813cfa6b390)
proxmox-kernel-helper: 8.0.3
pve-kernel-5.15: 7.4-6
proxmox-kernel-6.2.16-19-pve: 6.2.16-19
proxmox-kernel-6.2: 6.2.16-19
proxmox-kernel-6.2.16-12-pve: 6.2.16-12
pve-kernel-5.15.116-1-pve: 5.15.116-1
ceph-fuse: 16.2.11+ds-2
corosync: 3.1.7-pve3
criu: 3.17.1-2
glusterfs-client: 10.3-5
ifupdown: residual config
ifupdown2: 3.2.0-1+pmx5
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-4
libknet1: 1.28-pve1
libproxmox-acme-perl: 1.4.6
libproxmox-backup-qemu0: 1.4.0
libproxmox-rs-perl: 0.3.1
libpve-access-control: 8.0.5
libpve-apiclient-perl: 3.3.1
libpve-common-perl: 8.0.9
libpve-guest-common-perl: 5.0.5
libpve-http-server-perl: 5.0.4
libpve-rs-perl: 0.8.5
libpve-storage-perl: 8.0.2
libspice-server1: 0.15.1-1
lvm2: 2.03.16-2
lxc-pve: 5.0.2-4
lxcfs: 5.0.3-pve3
novnc-pve: 1.4.0-2
proxmox-backup-client: 3.0.4-1
proxmox-backup-file-restore: 3.0.4-1
proxmox-kernel-helper: 8.0.3
proxmox-mail-forward: 0.2.0
proxmox-mini-journalreader: 1.4.0
proxmox-offline-mirror-helper: 0.6.2
proxmox-widget-toolkit: 4.0.9
pve-cluster: 8.0.4
pve-container: 5.0.5
pve-docs: 8.0.5
pve-edk2-firmware: 3.20230228-4
pve-firewall: 5.0.3
pve-firmware: 3.8-3
pve-ha-manager: 4.0.2
pve-i18n: 3.0.7
pve-qemu-kvm: 8.0.2-7
pve-xtermjs: 4.16.0-3
qemu-server: 8.0.7
smartmontools: 7.3-pve1
spiceterm: 3.3.0
swtpm: 0.8.0+pve1
vncterm: 1.8.0
zfsutils-linux: 2.1.13-pve1
Code:
# zpool status
pool: rpool
state: ONLINE
scan: scrub repaired 0B in 00:00:47 with 0 errors on Sun Oct 8 00:24:50 2023
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
scsi-35000c500589b2a97-part3 ONLINE 0 0 0
scsi-35000c50085a9258f-part3 ONLINE 0 0 0
errors: No known data errors