problems with usb_add

[Supme]

# lsusb -t
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/2p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
|__ Port 3: Dev 2, If 0, Class=HID, Driver=usbhid, 12M
|__ Port 3: Dev 2, If 1, Class=HID, Driver=usbhid, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
|__ Port 4: Dev 19, If 0, Class=stor., Driver=usb-storage, 480M
|__ Port 5: Dev 2, If 0, Class=stor., Driver=usb-storage, 480M


# qm set 101 -usb0 host=1-1.1

no errors, but my flash drive not find in vm

in web monitor vm 101, commands:


# info usb
Device 0.1, Port 6, Speed 12 Mb/s, Product QEMU USB Tablet
Device 0.0, Port 1, Speed 1.5 Mb/s, Product USB Host Device

# info usbhost
Bus 1, Addr 2, Port 5, Speed 480 Mb/s
Class 00: USB device 05e3:0719, USB Storage
Bus 5, Addr 2, Port 3, Speed 12 Mb/s
Class 00: USB device 0557:2221, Hermon USB hidmouse Device
Bus 1, Addr 19, Port 4, Speed 480 Mb/s Class 00: USB device 0781:556b, Cruzer Edge
Auto filters:
Bus 1, Addr *, Port 1.1, ID *:*

 

[Supme]

O... I'm sorry

qm set 101 -usb0 host=1-4

and one port from host mashine connect in virtual mashine

qm set 101 -usb1 host=1-5

and one more usb port comming in virtual mashine

Thank you!!!

 

[dietmar]

qm set 101 -usb1 host=1-5

and one more usb port comming in virtual mashine

Just wonder if it works when you use:

# qm set 101 -usb0 host=1-1

(pass the hub)

 

[Supme]

Not working...
# info usb
Device 0.1, Port 6, Speed 12 Mb/s, Product QEMU USB TabletDevice 0.0, Port 1, Speed 1.5 Mb/s, Product USB Host
Device

# info usbhost
Bus 1, Addr 2, Port 5, Speed 480 Mb/s
Class 00: USB device 05e3:0719, USB Storage
Bus 5, Addr 2, Port 3, Speed 12 Mb/s
Class 00: USB device 0557:2221, Hermon USB hidmouse Device
Bus 1, Addr 27, Port 4, Speed 480 Mb/s
Class 00: USB device 1f75:0902, Silicon-Power8G
Auto filters:
Bus 1, Addr *, Port 1, ID *:*

# lsusb -t
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/2p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
|__ Port 3: Dev 2, If 0, Class=HID, Driver=usbhid, 12M
|__ Port 3: Dev 2, If 1, Class=HID, Driver=usbhid, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
|__ Port 4: Dev 27, If 0, Class=stor., Driver=usb-storage, 480M
|__ Port 5: Dev 2, If 0, Class=stor., Driver=usb-storage, 480M

 

[Zueuk]

Hi all!

device_add in qm monitor working.

How can remove device? I try to run device_del, but get error.
Connected in VM usb-device:

qm> info usb
       Device 0.2, Port 2.2, Speed 480 Mb/s, Product My Passport 074A

qm> info usbhost
  Bus 2, Addr 11, Port 1.6, Speed 480 Mb/s
         Class 00: USB device 1058:074a, Product My Passport 074A

What parameters should use with device_del?