Hi.
Continuing to explore Proxmox I'm trying to setup the networks as I'd like it.
I have two boxes with 4 NICs each. A Supermicro X10SDV-6C and a Supermicro A1SAi-2550.
Two of the NICs on each machine are wired to a switch.
The other two are wired directly between the two machines.
Now, I'd like to create a bond for each set of wires using LACP.
On the X10SDV this is no problem. I have two bond-interfaces both working perfectly.
But on the A1SAi I can only get one bond to work at a time.
As soon as I add bond1-interface, vmbr0 stops working:
Any ideas?
Continuing to explore Proxmox I'm trying to setup the networks as I'd like it.
I have two boxes with 4 NICs each. A Supermicro X10SDV-6C and a Supermicro A1SAi-2550.
Two of the NICs on each machine are wired to a switch.
The other two are wired directly between the two machines.
Now, I'd like to create a bond for each set of wires using LACP.
On the X10SDV this is no problem. I have two bond-interfaces both working perfectly.
But on the A1SAi I can only get one bond to work at a time.
Code:
auto bond0
iface bond0 inet manual
slaves enp0s20f0 enp0s20f1
bond_miimon 100
bond_mode 802.3ad
auto vmbr0
iface vmbr0 inet static
address 10.3.0.32
netmask 255.255.0.0
gateway 10.3.0.1
bridge_ports bond0
bridge_stp off
bridge_fd 0As soon as I add bond1-interface, vmbr0 stops working:
Code:
auto bond1
iface bond1 inet manual
slaves enp0s20f2 enp0s20f3
bond_miimon 100
bond_mode 802.3ad
auto bond0
iface bond0 inet manual
slaves enp0s20f0 enp0s20f1
bond_miimon 100
bond_mode 802.3ad
auto vmbr0
iface vmbr0 inet static
address 10.3.0.32
netmask 255.255.0.0
gateway 10.3.0.1
bridge_ports bond0
bridge_stp off
bridge_fd 0Any ideas?