Hi all,
Sorry for my english...
Hi all,
I have a host with Proxmox 1.8 with 2 nic's. I created the vmbr0 with eth0 port on mode bridge with an ip, for example, 192.168.1.10. Also, I created another vmbr1 to the other nic, eth1 port, on mode bridge with an ip 192.168.1.20.
My test is to do a ping to each nic to see if each one runs correctly. The nic's are connected to the same switch. So I did the ping and responds correctly but if I disconnect the eth0, the vmbr0 not responds to ping ( ok ) but the vmbr1 ( bridged to eth1 ) not responds to pings...
If I disconnect the eth1 and the eth0 is connected, the vmbr0 and the vmbr1 responds to pings without problems...
I don't understand it, the configuration is correctly, vmbr0 bridged to eth0 and vmbr1 bridged to eth1. I see the configuration file /etc/network/interfaces and all seems fine like graphical interface, vmbr0 bridged to eth0 field, and vmbr1 to eth1 field.
The information that display ifconfig is correctly, all ok but seems like all traffic trough by the eth0 and not eth1, how is possibly? I have another host with proxmox 1.5 with 9 nic's and all runs correctly.
Thanks,
Sorry for my english...
Hi all,
I have a host with Proxmox 1.8 with 2 nic's. I created the vmbr0 with eth0 port on mode bridge with an ip, for example, 192.168.1.10. Also, I created another vmbr1 to the other nic, eth1 port, on mode bridge with an ip 192.168.1.20.
My test is to do a ping to each nic to see if each one runs correctly. The nic's are connected to the same switch. So I did the ping and responds correctly but if I disconnect the eth0, the vmbr0 not responds to ping ( ok ) but the vmbr1 ( bridged to eth1 ) not responds to pings...
If I disconnect the eth1 and the eth0 is connected, the vmbr0 and the vmbr1 responds to pings without problems...
I don't understand it, the configuration is correctly, vmbr0 bridged to eth0 and vmbr1 bridged to eth1. I see the configuration file /etc/network/interfaces and all seems fine like graphical interface, vmbr0 bridged to eth0 field, and vmbr1 to eth1 field.
The information that display ifconfig is correctly, all ok but seems like all traffic trough by the eth0 and not eth1, how is possibly? I have another host with proxmox 1.5 with 9 nic's and all runs correctly.
Thanks,