probleme with brigde

[keeksy]

Hello I use a server from webtropia
the orginal kernel is 2.6.33

I installed Proxmox VE with 2.6.32 it starts without problems

m111:~# uname -a
Linux m111.magenta.fastwebserver.de 2.6.32-1-pve #1 SMP Fri Jan 15 11:37:39 CET 2010 x86_64 GNU/Linux

when i want to setup the brigde networking from the toturial the server dosen´t won´t start

 

[tom]

Hello I use a server from webtropia
the orginal kernel is 2.6.33

I installed Proxmox VE with 2.6.32 it starts without problems

m111:~# uname -a
Linux m111.magenta.fastwebserver.de 2.6.32-1-pve #1 SMP Fri Jan 15 11:37:39 CET 2010 x86_64 GNU/Linux

when i want to setup the brigde networking from the toturial the server dosen´t won´t start

the screenshot shows a non-standard setup - ask the hosting company why the don´t use the standard setup.

 

[keeksy]

debian lenny 5
eth0 standdart conf des servers

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
address 85.114.135.111
netmask 255.255.255.0
broadcast 85.114.135.255
gateway 85.114.135.1

standart uname -a

m111:~# uname -a
Linux m111.magenta.fastwebserver.de 2.6.33-myloc #1 SMP Thu Feb 25 21:41:57 UTC 2010 x86_64 GNU/Linux

Standdart ifconfig

m111:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:27:0e:0a:d6:03
inet addr:85.114.135.111 Bcast:85.114.135.255 Mask:255.255.255.0
inet6 addr: fe80::227:eff:fe0a:d603/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:27800 errors:0 dropped:0 overruns:0 frame:0
TX packets:537 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:1927509 (1.8 MiB) TX bytes:77704 (75.8 KiB)
Memory:fb100000-fb120000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:68 errors:0 dropped:0 overruns:0 frame:0
TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5915 (5.7 KiB) TX bytes:5915 (5.7 KiB)

this ist after fresh installing from image of the hosters

 

[tom]

debian lenny 5
eth0 standdart conf des servers
standart uname -a
Standdart ifconfig



this ist after fresh installing from image of the hosters

that's the point. you hoster installed a modified system (not Proxmox VE). therefore you need to ask them when something is not working. how should we know what they changed? I know a lot but I am not a visionary ...

there are a lot of hoster which just provide Proxmox VE to their customers without getting certification and tests with us - there are only a few partnering with us and delivering the right service - one example of a Proxmox VE hosting partner is OVH.