Hi, Christoph,
wenn die SSDs mal platt sind kommen vernünftige rein .
VG
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 870 QVO 4TB
Serial Number: S5STNF0W409315E
LU WWN Device Id: 5 002538 f434434f6
Firmware Version: SVQ02B6Q
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Dec 8 09:33:40 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 320) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 099 099 000 - 2878
12 Power_Cycle_Count -O--CK 099 099 000 - 18
177 Wear_Leveling_Count PO--C- 099 099 000 - 3
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 059 029 000 - 41
195 ECC_Error_Rate -O-RC- 200 200 000 - 0
199 CRC_Error_Count -OSRCK 097 097 000 - 2106
235 POR_Recovery_Count -O--C- 099 099 000 - 12
241 Total_LBAs_Written -O--CK 099 099 000 - 19696310851
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 SL VS 16 Device vendor specific log
0xa5 SL VS 16 Device vendor specific log
0xce SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
256 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 41 Celsius
Power Cycle Min/Max Temperature: 34/65 Celsius
Lifetime Min/Max Temperature: 40/71 Celsius
Specified Max Operating Temperature: 70 Celsius
Under/Over Temperature Limit Count: 0/0
SMART Status: 0xc24f (PASSED)
SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (13)
Index Estimated Time Temperature Celsius
14 2023-12-07 12:20 36 *****************
... ..( 2 skipped). .. *****************
17 2023-12-07 12:50 36 *****************
18 2023-12-07 13:00 37 ******************
19 2023-12-07 13:10 37 ******************
20 2023-12-07 13:20 36 *****************
... ..( 4 skipped). .. *****************
25 2023-12-07 14:10 36 *****************
26 2023-12-07 14:20 35 ****************
27 2023-12-07 14:30 35 ****************
28 2023-12-07 14:40 35 ****************
29 2023-12-07 14:50 37 ******************
30 2023-12-07 15:00 36 *****************
31 2023-12-07 15:10 36 *****************
32 2023-12-07 15:20 35 ****************
... ..( 31 skipped). .. ****************
64 2023-12-07 20:40 35 ****************
65 2023-12-07 20:50 40 *********************
66 2023-12-07 21:00 37 ******************
67 2023-12-07 21:10 36 *****************
68 2023-12-07 21:20 35 ****************
... ..( 6 skipped). .. ****************
75 2023-12-07 22:30 35 ****************
76 2023-12-07 22:40 40 *********************
77 2023-12-07 22:50 42 ***********************
78 2023-12-07 23:00 39 ********************
79 2023-12-07 23:10 40 *********************
80 2023-12-07 23:20 37 ******************
81 2023-12-07 23:30 36 *****************
82 2023-12-07 23:40 36 *****************
83 2023-12-07 23:50 39 ********************
84 2023-12-08 00:00 37 ******************
85 2023-12-08 00:10 36 *****************
86 2023-12-08 00:20 35 ****************
... ..( 9 skipped). .. ****************
96 2023-12-08 02:00 35 ****************
97 2023-12-08 02:10 40 *********************
98 2023-12-08 02:20 38 *******************
99 2023-12-08 02:30 36 *****************
100 2023-12-08 02:40 44 *************************
101 2023-12-08 02:50 39 ********************
102 2023-12-08 03:00 40 *********************
103 2023-12-08 03:10 37 ******************
104 2023-12-08 03:20 36 *****************
105 2023-12-08 03:30 36 *****************
106 2023-12-08 03:40 35 ****************
... ..( 9 skipped). .. ****************
116 2023-12-08 05:20 35 ****************
117 2023-12-08 05:30 36 *****************
118 2023-12-08 05:40 35 ****************
119 2023-12-08 05:50 35 ****************
120 2023-12-08 06:00 41 **********************
121 2023-12-08 06:10 41 **********************
122 2023-12-08 06:20 38 *******************
123 2023-12-08 06:30 36 *****************
124 2023-12-08 06:40 36 *****************
125 2023-12-08 06:50 35 ****************
... ..( 6 skipped). .. ****************
4 2023-12-08 08:00 35 ****************
5 2023-12-08 08:10 36 *****************
6 2023-12-08 08:20 35 ****************
7 2023-12-08 08:30 36 *****************
8 2023-12-08 08:40 36 *****************
9 2023-12-08 08:50 36 *****************
10 2023-12-08 09:00 35 ****************
11 2023-12-08 09:10 35 ****************
12 2023-12-08 09:20 35 ****************
13 2023-12-08 09:30 43 ************************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 18 --- Lifetime Power-On Resets
0x01 0x010 4 2878 --- Power-on Hours
0x01 0x018 6 19696310851 --- Logical Sectors Written
0x01 0x020 6 227995944 --- Number of Write Commands
0x01 0x028 6 30975185526 --- Logical Sectors Read
0x01 0x030 6 439180056 --- Number of Read Commands
0x01 0x038 6 1403000 --- Date and Time TimeStamp
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 41 --- Current Temperature
0x05 0x020 1 71 --- Highest Temperature
0x05 0x028 1 40 --- Lowest Temperature
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 2211 --- Number of Hardware Resets
0x06 0x010 4 0 --- Number of ASR Events
0x06 0x018 4 2106 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 1024 Command failed due to ICRC error
0x0002 2 1023 R_ERR response for data FIS
0x0003 2 1023 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 2487 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 2487 R_ERR response for host-to-device non-data FIS
0x0008 2 2487 Device-to-host non-data FIS retries
0x0009 2 65535+ Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 1062 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
