problem zfs don't boot after upgrade from 8.1.4 to 8.2.2 enterprise repository
- Thread starter pwa_umk
- Start date
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
you mean he could try to disable secure boot or sth like that?do you have an LSI-Controller?
I have a similar problem (no disks on H330 after update), booting BIOS or UEFI doesn't matter.you mean he could try to disable secure boot or sth like that?
looks for me like the initramfs misses some module or sth. But if update-initramfs doesn't help im out of ideas.I have a similar problem (no disks on H330 after update), booting BIOS or UEFI doesn't matter.
Im using in one of my Servers an LSI 9305-24i (Backup-Server) and have no issues there with 6.8, the card just doesn support secure boot, means the os drives connected to that LSI card won't get recognized with Secure-Boot, since the card isn't available at boot time.
But that happened already since i exchanged the old HP Crap Raid-Controller with the 9305-24i, the HP-Raid controller did secure-boot without issues xD
However, that wont help you both. Seems like you're probably Stuck for now with the older Kernel. Or you have to find out which module initramfs misses, and then see if the Proxmox-Team could add it back or if there is a dkms or whatever package available.
For my LSI 9305, i have this modules that are automatically loaded (didn't needed to do or add anything)
Code:
raid_class 12288 1 mpt3sas
scsi_transport_sas 53248 1 mpt3sasCheers
thank you for the tip, but unfortunately it didn't help, the latest kernel still stops on zfscan you do an:
Code:update-initramfs -u -k all update-grub
and reboot again into 6.8 to try ?
i have disable secure bootyou mean he could try to disable secure boot or sth like that?
I think, it is the same problem like mine. Can you check lspci -> Controller found, lsblk -> no disks
edit: I use the megaraid_sas driver, is it possible to switch to mpt3sas?
i have updated the controller-firmware (https://www.dell.com/support/home/de-de/drivers/driversdetails?driverid=nykx7) and linux driver to
07.728.04.00
same error:
The error is only with megaraid_sas, my other system with mpt3sas works after the update.
edit: I use the megaraid_sas driver, is it possible to switch to mpt3sas?
i have updated the controller-firmware (https://www.dell.com/support/home/de-de/drivers/driversdetails?driverid=nykx7) and linux driver to
07.728.04.00
same error:
Code:
root@proxmox02:~# dmesg |grep mega
[ 1.113827] megasas: 07.727.03.00-rc1
[ 1.118454] megaraid_sas 0000:01:00.0: BAR:0x1 BAR's base_addr(phys):0x00000000df200000 mapped virt_addr:0x0000000069fbd2a7
[ 1.118459] megaraid_sas 0000:01:00.0: FW now in Ready state
[ 1.118461] megaraid_sas 0000:01:00.0: 63 bit DMA mask and 32 bit consistent mask
[ 1.118634] megaraid_sas 0000:01:00.0: firmware supports msix : (96)
[ 1.118736] megaraid_sas 0000:01:00.0: requested/available msix 5/5 poll_queue 0
[ 1.118739] megaraid_sas 0000:01:00.0: current msix/online cpus : (5/4)
[ 1.118740] megaraid_sas 0000:01:00.0: RDPQ mode : (disabled)
[ 1.118742] megaraid_sas 0000:01:00.0: Current firmware supports maximum commands: 928 LDIO threshold: 237
[ 1.120791] megaraid_sas 0000:01:00.0: Performance mode :Latency (latency index = 1)
[ 1.120794] megaraid_sas 0000:01:00.0: FW supports sync cache : No
[ 1.120797] megaraid_sas 0000:01:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009
[ 6.844721] megaraid_sas 0000:01:00.0: Ignore DCMD timeout: megasas_get_ctrl_info 5382
[ 6.844725] megaraid_sas 0000:01:00.0: Could not get controller info. Fail from megasas_init_adapter_fusion 1907
[ 6.845657] megaraid_sas 0000:01:00.0: Failed from megasas_init_fw 6539The error is only with megaraid_sas, my other system with mpt3sas works after the update.
Last edited:
I found a topic on https://forums.unraid.net/topic/124000-unable-to-utilize-hba-fw-not-loading/. Using megaraid_sas driver maybe wrong, controller in IT-Mode should use mpt3sas. How to change the driver?