Hi all!
I conected to proxmox one storage via lc and one via sas. And in proxmox i don't see the second storage. My server is dell r910 and my sas controller - dell perc h800. Trying to resolve this problem, i install dell open manage. omreport storage controller show me that proxmox see the controller:
ID : 1
Status : Non-Critical
Name : PERC H800 Adapter
Slot ID : PCI Slot 2
State : Degraded
Firmware Version : 12.10.4-0001
Latest Available Firmware Version : 12.10.5-0001
Driver Version : 00.00.06.14-rh1
Minimum Required Driver Version : Not Applicable
Storport Driver Version : Not Applicable
Minimum Required Storport Driver Version : Not Applicable
Number of Connectors : 2
Rebuild Rate : 30%
BGI Rate : 30%
Check Consistency Rate : 30%
Reconstruct Rate : 30%
Alarm State : Not Applicable
Cluster Mode : Not Applicable
SCSI Initiator ID : Not Applicable
Cache Memory Size : 512 MB
Patrol Read Mode : Auto
Patrol Read State : Stopped
Patrol Read Rate : 30%
Patrol Read Iterations : 0
Abort Check Consistency on Error : Disabled
Allow Revertible Hot Spare and Replace Member : Enabled
Load Balance : Auto
Auto Replace Member on Predictive Failure : Disabled
Redundant Path view : Not Applicable
CacheCade Capable : Not Applicable
Persistent Hot Spare : Disabled
Encryption Capable : Yes
Encryption Key Present : No
Encryption Mode : None
Preserved Cache : Not Applicable
Spin Down Unconfigured Drives : Disabled
Spin Down Hot Spares : Disabled
Spin Down Configured Drives : Not Applicable
Automatic Disk Power Saving (Idle C) : Not Applicable
But fdisk -l don't show me the second storage
What i do wrong?
P.S. Sorry for my pure english
I conected to proxmox one storage via lc and one via sas. And in proxmox i don't see the second storage. My server is dell r910 and my sas controller - dell perc h800. Trying to resolve this problem, i install dell open manage. omreport storage controller show me that proxmox see the controller:
ID : 1
Status : Non-Critical
Name : PERC H800 Adapter
Slot ID : PCI Slot 2
State : Degraded
Firmware Version : 12.10.4-0001
Latest Available Firmware Version : 12.10.5-0001
Driver Version : 00.00.06.14-rh1
Minimum Required Driver Version : Not Applicable
Storport Driver Version : Not Applicable
Minimum Required Storport Driver Version : Not Applicable
Number of Connectors : 2
Rebuild Rate : 30%
BGI Rate : 30%
Check Consistency Rate : 30%
Reconstruct Rate : 30%
Alarm State : Not Applicable
Cluster Mode : Not Applicable
SCSI Initiator ID : Not Applicable
Cache Memory Size : 512 MB
Patrol Read Mode : Auto
Patrol Read State : Stopped
Patrol Read Rate : 30%
Patrol Read Iterations : 0
Abort Check Consistency on Error : Disabled
Allow Revertible Hot Spare and Replace Member : Enabled
Load Balance : Auto
Auto Replace Member on Predictive Failure : Disabled
Redundant Path view : Not Applicable
CacheCade Capable : Not Applicable
Persistent Hot Spare : Disabled
Encryption Capable : Yes
Encryption Key Present : No
Encryption Mode : None
Preserved Cache : Not Applicable
Spin Down Unconfigured Drives : Disabled
Spin Down Hot Spares : Disabled
Spin Down Configured Drives : Not Applicable
Automatic Disk Power Saving (Idle C) : Not Applicable
But fdisk -l don't show me the second storage
What i do wrong?
P.S. Sorry for my pure english