D
dghvoip
Guest
I created a cluster and I erroneously changed the name of the machine in /etc/hostname and /etc/hosts on both servers, then I created the cluster and I guess I screwed the machine up, now I tried adding the new cluster member cluster node 1 shows
member 1 shows
I changed the names back to what they were, now another big issue is that machines won't start automatically and when trying to change them from the WebUI I get errors.
I want to know how do I re create the server, if possible or do i have to buy support?, this is a mission critical machine, please advise.
Thanks.
Code:
root@customer:~# pvecm status
cman_tool: Cannot open connection to cman, is it running ?
root@customer:~# /etc/init.d/cman start
Starting cluster:
Checking if cluster has been disabled at boot... [ OK ]
Checking Network Manager... [ OK ]
Global setup... [ OK ]
Loading kernel modules... [ OK ]
Mounting configfs... [ OK ]
Starting cman... /usr/sbin/ccs_config_validate: line 186: 4060 Segmentation fault (core dumped) ccs_config_dump > $tempfile
Unable to get the configuration
corosync [MAIN ] Corosync Cluster Engine ('1.4.3'): started and ready to provide service.
corosync [MAIN ] Corosync built-in features: nss
corosync [MAIN ] Successfully read config from /etc/cluster/cluster.conf
corosync died with signal: 11 Check cluster logs for details
[FAILED]
Stopping cluster:
Stopping dlm_controld... [ OK ]
Stopping fenced... [ OK ]
Stopping cman... [ OK ]
Unloading kernel modules... [ OK ]
Unmounting configfs... [ OK ]
member 1 shows
Code:
root@proxmox-node2:~# pvecm status
Version: 6.2.0
Config Version: 2
Cluster Name: paymcloud
Cluster Id: 55546
Cluster Member: Yes
Cluster Generation: 8
Membership state: Cluster-Member
Nodes: 1
Expected votes: 2
Total votes: 1
Node votes: 1
Quorum: 2 Activity blocked
Active subsystems: 1
Flags:
Ports Bound: 0
Node name: proxmox-node2
Node ID: 2
Multicast addresses: 239.192.xxx.xxx
Node addresses: 217.23.xxx.xxx
I changed the names back to what they were, now another big issue is that machines won't start automatically and when trying to change them from the WebUI I get errors.
I want to know how do I re create the server, if possible or do i have to buy support?, this is a mission critical machine, please advise.
Thanks.