Hello.
I bought a Beelin SER6 MAX mini PC to create my second Proxmox node.
I'm experiencing a lot of stability issues.
After several tests, I really think it's related to the internal Intel I225-V network card.
It started with network loss.
At boot, the card wasn't recognized, then after several reboots, it was.
The most common problem is that if the card is active with a network cable, the Proxmox reboots in a loop.
As soon as I disconnect the network from the card, Proxmox starts.
But as soon as I plug in the network cable,
The card blinks, but the enp2s0 stays down.
When I run an ethtool enp2s0, I get
netlink-error: no such device
My Proxmox is unusable.
I bought a Beelin SER6 MAX mini PC to create my second Proxmox node.
I'm experiencing a lot of stability issues.
After several tests, I really think it's related to the internal Intel I225-V network card.
It started with network loss.
At boot, the card wasn't recognized, then after several reboots, it was.
The most common problem is that if the card is active with a network cable, the Proxmox reboots in a loop.
As soon as I disconnect the network from the card, Proxmox starts.
But as soon as I plug in the network cable,
The card blinks, but the enp2s0 stays down.
When I run an ethtool enp2s0, I get
netlink-error: no such device
My Proxmox is unusable.