Problem installing via IPMI Supermicro

[yena]

Hello,
i'm trying the setup on a Supermicro server ( last IPMI ver.)
But i can't see all the screen and so i can't proceed ..
Any ideas ?
Thanks!!

 

[brad_mssw]

Typically you would just close the console and restart it and it will size the screen properly. That said, I typically use the actually IPMIView utility supermicro provides and not the one built into the web interface.

If that doesn't work, you'll need to pass a command line option to the boot loader like vga=0x318 will force it to 1024x768, however its been a while since I used the installer, I don't recall how to get it to pass that command line to the kernel during boot.

 

[yena]

Typically you would just close the console and restart it and it will size the screen properly. That said, I typically use the actually IPMIView utility supermicro provides and not the one built into the web interface.

If that doesn't work, you'll need to pass a command line option to the boot loader like vga=0x318 will force it to 1024x768, however its been a while since I used the installer, I don't recall how to get it to pass that command line to the kernel during boot.

finded.. type debug at startup .. but seem the same.. no changes

 

[dcsapak]

as a work around you can hold the "alt" key and move the window with the left mouse button

 

[David Pilibosian]

Set the video card to UEFI mode in bios and it should be fixed