Plesk unter Proxmox LCX Container installieren

[q-member]

Hallo zusammen!

Ich versuche gerade auf einem Linux Container Plesk zu installieren. Egal welches Betriebssystem ich installiere bekomme ich meistens folgende Fehler:

mknod: /var/www/vhosts/chroot/dev/null: Operation not permitted
chown: cannot access '/var/www/vhosts/chroot/dev/null': No such file or directory
mknod: /var/www/vhosts/chroot/dev/random: Operation not permitted
mknod: /var/www/vhosts/chroot/dev/urandom: Operation not permitted
chown: cannot access '/var/www/vhosts/chroot/dev/random': No such file or directory
chown: cannot access '/var/www/vhosts/chroot/dev/urandom': No such file or directory

Executing: /lib/systemd/systemd-sysv-install enable networking
insserv: FATAL: service mountkernfs has to be enabled to use service networking
insserv: FATAL: service urandom has to be enabled to use service networking
insserv: FATAL: service mountkernfs has to be enabled to use service networking
insserv: FATAL: service urandom has to be enabled to use service networking
xinetd.service is not a native service, redirecting to systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable xinetd

Kann mir jemand helfen ?

 

[oguz]

hi,

funktioniert ganz gut auf einem unpriviligierten debian 11 container, siehe [0] unter "Install Plesk in One Click" hat bei mir funktioniert.

[0]: https://www.plesk.com/blog/various/install-plesk-linux/

 

[q-member]

Also ich habe folgendes getan:













Bei diesen Einstellungen und der Installation bekomme ich immer den bereits genannten Fehler im log:

mknod: /var/www/vhosts/chroot/dev/null: Operation not permitted
chown: cannot access '/var/www/vhosts/chroot/dev/null': No such file or directory
mknod: /var/www/vhosts/chroot/dev/random: Operation not permitted
mknod: /var/www/vhosts/chroot/dev/urandom: Operation not permitted
chown: cannot access '/var/www/vhosts/chroot/dev/random': No such file or directory
chown: cannot access '/var/www/vhosts/chroot/dev/urandom': No such file or directory

insserv: FATAL: service mountkernfs has to be enabled to use service networking
insserv: FATAL: service urandom has to be enabled to use service networking
insserv: FATAL: service mountkernfs has to be enabled to use service networking
insserv: FATAL: service urandom has to be enabled to use service networking
xinetd.service is not a native service, redirecting to systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable xinetd

Am Ende sagt er sogar das er quasi fertig ist ... im Plesk gibt es dann aber auch diverse Fehler:



Hier beispielsweise in der Prozessliste

 

[oguz]

probier mal die mknod option fuer deinen container einzusetzen: pct set 200 -features nesting=1,mknod=1 (oder im GUI unter "Options -> Features -> Create Device Nodes")

 

[q-member]

Habe mit der Option andere Fehler nach der Installation:

Dieser Fehler kommt wenn ich das System überprüfen lasse:

The operation failed with the following error: {"id":1,"cmd":"plesk repair fs -n","type":"progress","message":"Checking Linux system files","level":0} {"id":2,"cmd":"plesk repair fs -n","type":"error","message":"There are incorrect permissions on some items: \/dev\/null","level":1} {"id":3,"cmd":"plesk repair fs -n","type":"error","message":"There are incorrect permissions on some items: \/dev\/random","level":1} {"id":4,"cmd":"plesk repair fs -n","type":"error","message":"There are incorrect permissions on some items: \/dev\/urandom","level":1} {"id":5,"cmd":"plesk repair fs -n","type":"progress","message":"Checking virtual hosts' file system","level":0} {"id":5,"cmd":"plesk repair fs -n","type":"success","message":"Checking virtual hosts' file system","level":0}

Wenn ich Repair sage:

The operation failed with the following error: {"id":1,"cmd":"plesk repair fs -y","type":"progress","message":"Checking Linux system files","level":0} {"id":2,"cmd":"plesk repair fs -y","type":"error","message":"There are incorrect permissions on some items: \/dev\/null","level":1} {"id":3,"cmd":"plesk repair fs -y","type":"progress","message":"Repairing incorrect permissions","level":2} {"id":3,"cmd":"plesk repair fs -y","type":"failed","message":"Repairing incorrect permissions","level":2} {"id":3,"cmd":"plesk repair fs -y","type":"failed","message":"Repairing incorrect permissions","level":2,"details":"fsmng failed: ERROR:[Errno 1] Operation not permitted:\n'\/dev\/null'\n"} {"id":4,"cmd":"plesk repair fs -y","type":"error","message":"There are incorrect permissions on some items: \/dev\/random","level":1} {"id":5,"cmd":"plesk repair fs -y","type":"progress","message":"Repairing incorrect permissions","level":2} {"id":5,"cmd":"plesk repair fs -y","type":"failed","message":"Repairing incorrect permissions","level":2} {"id":5,"cmd":"plesk repair fs -y","type":"failed","message":"Repairing incorrect permissions","level":2,"details":"fsmng failed: ERROR:[Errno 1] Operation not permitted:\n'\/dev\/random'\n"} {"id":6,"cmd":"plesk repair fs -y","type":"error","message":"There are incorrect permissions on some items: \/dev\/urandom","level":1} {"id":7,"cmd":"plesk repair fs -y","type":"progress","message":"Repairing incorrect permissions","level":2} {"id":7,"cmd":"plesk repair fs -y","type":"failed","message":"Repairing incorrect permissions","level":2} {"id":7,"cmd":"plesk repair fs -y","type":"failed","message":"Repairing incorrect permissions","level":2,"details":"fsmng failed: ERROR:[Errno 1] Operation not permitted:\n'\/dev\/urandom'\n"} {"id":8,"cmd":"plesk repair fs -y","type":"progress","message":"Checking virtual hosts' file system","level":0} {"id":8,"cmd":"plesk repair fs -y","type":"success","message":"Checking virtual hosts' file system","level":0}

Im Bereich der Prozessliste:

An error has occurred while receiving disk operations usage. Stdout: Stderr: Traceback (most recent call last): File "/usr/sbin/iotop", line 17, in main() File "/usr/lib/python3/dist-packages/iotop/ui.py", line 737, in main main_loop() File "/usr/lib/python3/dist-packages/iotop/ui.py", line 727, in main_loop = lambda: run_iotop(options) File "/usr/lib/python3/dist-packages/iotop/ui.py", line 618, in run_iotop return run_iotop_window(None, options) File "/usr/lib/python3/dist-packages/iotop/ui.py", line 609, in run_iotop_window taskstats_connection = TaskStatsNetlink(options) File "/usr/lib/python3/dist-packages/iotop/data.py", line 151, in __init__ self.family_id = controller.get_family_id('TASKSTATS') File "/usr/lib/python3/dist-packages/iotop/genetlink.py", line 76, in get_family_id m = GeNlMessage.recv(self.conn) File "/usr/lib/python3/dist-packages/iotop/genetlink.py", line 56, in recv msg = conn.recv() File "/usr/lib/python3/dist-packages/iotop/netlink.py", line 255, in recv raise err OSError: Netlink error: No such file or directory (2) Exit code: 1

Bei der Installation sind mir folgende Fehler aufgefallen:

dpkg-divert: warning: please specify --no-rename explicitly, the default will change to --rename in 1.20.x

Job for dovecot.service failed because the control process exited with error code.
See "systemctl status dovecot.service" and "journalctl -xe" for details.
 Trying to switch Horde Ingo backend to 'sieve'... Ingo doesn't seem to be installed. Skip.
 Trying to start service dovecot... inactive
 
 ***** installing problem report *****
Warning: start service dovecot failed
***** installing problem report *****
Warning: start service dovecot failed
STOP plesk-dovecot-2.3.18 installing AT Thu Aug  4 09:07:41 UTC 2022: PROBLEMS FOUND

ERROR: Upgrade step 2019-02-19-12-00-23_EnableSpfDkimDmarc.php failed with code 1 and output:
INFO: Executing upgrade task: 2019-02-19-12-00-23 (clean)
[2022-08-04 09:08:16.404] 26972:62eb8c8062a1b ERR [util_exec] proc_close() failed ['/opt/psa/admin/bin/mailmng-service' '--restart-service' '--mail-component=all'] with exit code [1]
[2022-08-04 09:08:16.487] 26972:62eb8c8062a1b ERR [panel] mailmng-service failed: :
0: /opt/psa/admin/plib/Upgrade/upgrade.php:46
ERROR: Plesk\Upgrade\Exception: mailmng-service failed:  (upgrade.php:46)
0: /opt/psa/admin/plib/Upgrade/upgrade.php:46

insserv: FATAL: service mountkernfs has to be enabled to use service networking
insserv: FATAL: service urandom has to be enabled to use service networking
insserv: FATAL: service mountkernfs has to be enabled to use service networking
insserv: FATAL: service urandom has to be enabled to use service networking
***** installing problem report *****
Warning: execute post install/upgrade actions
***** installing problem report *****
Warning: execute post install/upgrade actions
STOP plesk-core-18.0 installing AT Thu Aug  4 09:08:37 UTC 2022: PROBLEMS FOUND
xinetd.service is not a native service, redirecting to systemd-sysv-install.