Hi,
New to Proxmox and having issues with vGPU passthrough.
Followed instructions as per the youtube video - https://www.youtube.com/watch?v=jTXPMcBqoi8
My system is a HP Z640 - Xeon E5-1650 v3 3.50Ghz 32GB RAM, 2 x 240GB SSD (Proxmox installed on SSD with a ZFS - RAID1), Quadro M6000 12GB, and VM's running on a 2 x 500GB NVMe. Also on a ZFS RAID - 1.
I want to passthrough my 'Quadro M6000 - 12GB' to multiple VM (3 if possible. only trying to get 1 to work with 4GB for now).
Getting the following error when trying to launch a Windows 10 VM with the PCI device attached (Otherwise Windows VM boots up fine) :
kvm: -device vfio-pci,sysfsdev=/sys/bus/mdev/devices/00000000-0000-0000-0000-000000000110,id=hostpci0,bus=ich9-pcie-port-1,addr=0x0,bootindex=103: vfio 00000000-0000-0000-0000-000000000110: error getting device from group 41: Input/output error
Verify all devices in group 41 are bound to vfio-<bus> or pci-stub and not already in use
TASK ERROR: start failed: QEMU exited with code 1
Been trying to figure this out by going through other post for several days, but have been unsuccessful.
I have also attached the SYSLOG file and a few other files that might help someone who can make heads or tails of it.
Any help will be greatly appreciated and thanks in advance.
New to Proxmox and having issues with vGPU passthrough.
Followed instructions as per the youtube video - https://www.youtube.com/watch?v=jTXPMcBqoi8
My system is a HP Z640 - Xeon E5-1650 v3 3.50Ghz 32GB RAM, 2 x 240GB SSD (Proxmox installed on SSD with a ZFS - RAID1), Quadro M6000 12GB, and VM's running on a 2 x 500GB NVMe. Also on a ZFS RAID - 1.
I want to passthrough my 'Quadro M6000 - 12GB' to multiple VM (3 if possible. only trying to get 1 to work with 4GB for now).
Getting the following error when trying to launch a Windows 10 VM with the PCI device attached (Otherwise Windows VM boots up fine) :
kvm: -device vfio-pci,sysfsdev=/sys/bus/mdev/devices/00000000-0000-0000-0000-000000000110,id=hostpci0,bus=ich9-pcie-port-1,addr=0x0,bootindex=103: vfio 00000000-0000-0000-0000-000000000110: error getting device from group 41: Input/output error
Verify all devices in group 41 are bound to vfio-<bus> or pci-stub and not already in use
TASK ERROR: start failed: QEMU exited with code 1
Been trying to figure this out by going through other post for several days, but have been unsuccessful.
I have also attached the SYSLOG file and a few other files that might help someone who can make heads or tails of it.
Any help will be greatly appreciated and thanks in advance.