PB to Create VM Windows 10

[Mohamed HAJJEM]

good morning,

After setting up a Proxmox cluster containing 3 servers, I tried to create virtual machines to test different scenarios.
I created a machine under debian 12 with success, a second one in another server under windows server 2022 also with success, but the problem arises when creating a machine under windows 10, always I meet a problem at the end. the system starts the installation on the disk but after boot, it detected a problem.

Cordially;

 

[Hannes Laimer]

Hey,

have you tried using OVMF (UEFI) as BIOS with TPM and pre-enrolled keys?

 

[Mohamed HAJJEM]

hello,
I have changed the bios to UEFI , and I get the following error message

Cordially;

 

[gfngfn256]

I have changed the bios to UEFI

But you haven't added TPM as Hannes Laimer suggested. This is necessary for Windows 10 AFAIK.

In GUI; select VM, Hardware & Add (drop-down) TPM State.

 

[Mohamed HAJJEM]

Bonjour,

I have just added TPM as shown below

 

[Mohamed HAJJEM]

Hello,

The same problem occurs with UEFI and seabios , for the order WM Windows server 2022 the system is online

Cordially,

 

[gfngfn256]

Have you tried re-installing Windows 10 after UEFI & TPM?

 

[Mohamed HAJJEM]

No, I want to try to reinstall

 

[Mohamed HAJJEM]

Hello,
After reinstalling the system, the same problem occurs

 

[gfngfn256]

You may have a problem using that ide0 disk on ceph - maybe.
Try using SCSI with VirtIO SCSI as controller, you'll need to add VirtIO drivers - as detailed in Proxmox Wiki.

 

[Mohamed HAJJEM]

hello ,
the problem is that I can't finish installing Windows 10 and access the desktop to mount the virtio driver image, the message appears before finishing the installation
Cdt

 

[gfngfn256]

You need to follow the above Proxmox Wiki I posted. I quote:

Follow the installer steps until you reach the installation type selection where you need to select "Custom (advanced)"
Now click "Load driver" to install the VirtIO drivers for hard disk and the network

 

[Mohamed HAJJEM]

Hello,
please find attached the screenshots of the parametres for creating a new machine

Cordially

 

[Mohamed HAJJEM]

Hello
when I mounted the virtio ISO image, the disk is no longer displayed during installation

Cordially

 

[gfngfn256]

Why don't you read my instructions?

Hint: you need to press "Charger un pilote" (Load a driver) & select the Driver CD (virtio-win), make sure that "Include subfolders" is checked.

All the instructions are in the above Wiki. If English is a problem - just translate to French!

 

[Mohamed HAJJEM]

Hello,
I inform you that the problem during the installation of Windows 10 still occurs , I downloaded the Virtio drivers image and I mounted it in the VM , I tested the installation by adding the drivers of the viostor diques , the disk is well online , but the installation does not finish at the end

Cordially;