OVS Bond and Bridge, no network

infecticide

Active Member
Feb 7, 2018
9
0
41
39
I have a new Proxmox install, I'm trying to bond my 4 ethernet connections and put all the traffic (vm+management) through one bridge.

After I setup the networking and reboot I can't access anything over the network.

Here's what I ended up with in /etc/network/interfaces:

auto lo
iface lo inet loopback

iface eno1 inet manual

iface eno2 inet manual

iface eno3 inet manual

iface eno4 inet manual

iface enp0s29f0u2 inet manual

allow-vmbr0 bond0
iface bond0 inet manual
ovs_bonds eno1 eno2 eno3 eno4
ovs_type OVSBond
ovs_bridge vmbr0
ovs_options lacp=active bond_mode=balance-slb

auto vmbr0
iface vmbr0 inet static
address 192.168.2.135
netmask 255.255.255.0
gateway 192.168.2.1
ovs_type OVSBridge
ovs_ports bond0
 
Yet if I use the linux bond and bridge, it works fine:


auto lo
iface lo inet loopback

iface eno1 inet manual

iface eno2 inet manual

iface eno3 inet manual

iface eno4 inet manual

iface enp0s29f0u2 inet manual

auto bond0
iface bond0 inet manual
slaves eno1 eno2 eno3 eno4
bond_miimon 100
bond_mode 802.3ad
bond_xmit_hash_policy layer2

auto vmbr0
iface vmbr0 inet static
address 192.168.2.135
netmask 255.255.255.0
gateway 192.168.2.1
bridge_ports bond0
bridge_stp off
bridge_fd 0
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!