[SOLVED] Not all IMMOU groups showed

U

ukro

Member
May 16, 2021
124
13
23
39
Hi why in GUI i cant see all IOMMU groups?

IOMMU Group 0 00:00.0 Host bridge [0600]: Intel Corporation Device [8086:9b43] (rev 05)
IOMMU Group 1 00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 05)
IOMMU Group 2 00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:9bc5] (rev 05)
IOMMU Group 3 00:14.0 USB controller [0c03]: Intel Corporation Device [8086:a3af]
IOMMU Group 4 00:16.0 Communication controller [0780]: Intel Corporation Device [8086:a3ba]
IOMMU Group 5 00:17.0 SATA controller [0106]: Intel Corporation Device [8086:a382]
IOMMU Group 6 00:1b.0 PCI bridge [0604]: Intel Corporation Device [8086:a3e9] (rev f0)
IOMMU Group 7 00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:a392] (rev f0)
IOMMU Group 8 00:1c.3 PCI bridge [0604]: Intel Corporation Device [8086:a393] (rev f0)
IOMMU Group 8 00:1c.4 PCI bridge [0604]: Intel Corporation Device [8086:a394] (rev f0)
IOMMU Group 8 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
IOMMU Group 8 05:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a804]
IOMMU Group 9 00:1d.0 PCI bridge [0604]: Intel Corporation Device [8086:a398] (rev f0)
IOMMU Group 10 00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:a3c8]
IOMMU Group 10 00:1f.2 Memory controller [0580]: Intel Corporation Device [8086:a3a1]
IOMMU Group 10 00:1f.3 Audio device [0403]: Intel Corporation Device [8086:a3f0]
IOMMU Group 10 00:1f.4 SMBus [0c05]: Intel Corporation Device [8086:a3a3]
IOMMU Group 11 01:00.0 System peripheral [0880]: Device [1ac1:089a]


Screenshot_161.png
 
may i ask what that device is exactly ? by default, we filter out some pci classes,

namely

05Memory controller
06Bridge
08Generic system peripheral
0bProcessor
 
dcsapak said:
may i ask what that device is exactly ? by default, we filter out some pci classes,

namely

05Memory controller
06Bridge
08Generic system peripheral
0bProcessor
Click to expand...
Greetings,
it is Google coral edge TPU
Code: 
01:00.0 System peripheral: Device 1ac1:089a (prog-if ff)
        Subsystem: Device 1ac1:089a
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at a0100000 (64-bit, prefetchable) [size=16K]
        Region 2: Memory at a0000000 (64-bit, prefetchable) [size=1M]
        Capabilities: [80] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75.000W
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [d0] MSI-X: Enable+ Count=128 Masked-
                Vector table: BAR=2 offset=00046800
                PBA: BAR=2 offset=00046068
        Capabilities: [e0] MSI: Enable- Count=1/32 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [f8] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100 v1] Vendor Specific Information: ID=1556 Rev=1 Len=008 <?>
        Capabilities: [108 v1] Latency Tolerance Reporting
                Max snoop latency: 71680ns
                Max no snoop latency: 71680ns
        Capabilities: [110 v1] L1 PM Substates
                L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
                          PortCommonModeRestoreTime=10us PortTPowerOnTime=10us
                L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
                           T_CommonMode=0us LTR1.2_Threshold=0ns
                L1SubCtl2: T_PwrOn=10us
        Capabilities: [200 v2] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Kernel driver in use: vfio-pci
        Kernel modules: apex
 
Can you allow to let it in the GUI? :) i will be doing same new set up in about month and a half :D
 
can you open a feature request here: https://bugzilla.proxmox.com
then we can track this properly

normally this class '08' generic system peripherals do not contain interesting devices, but maybe we should show it nonetheless...
 
  • Like
Reactions: ukro
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back