I have 3 NICs installed and working. I want to test something out so I created a bond0 (Bond Configuration with Proxmox).
When I physically unplug the cables for eth1 & eth2, I lose the connection for the web interface (http://192.168.1.2:8006) even though eth0 is still plugged in. Eth0 was working because I used that before physically installing the eth1 and eth2 cards.
Code:
/etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet manual
iface eth1 inet manual
iface eth2 inet manual
auto bond0
iface bond0 inet static
address 192.168.1.3
netmask 255.255.255.0
slaves eth1 eth2
bond_miimon 100
bond_mode 802.3ad
auto vmbr0
iface vmbr0 inet static
address 192.168.1.2
netmask 255.255.255.0
gatway 192.168.1.1
bridge_ports eth0
bridge_stp off
bridge_fd 0
When I physically unplug the cables for eth1 & eth2, I lose the connection for the web interface (http://192.168.1.2:8006) even though eth0 is still plugged in. Eth0 was working because I used that before physically installing the eth1 and eth2 cards.