No Network connection to the Proxmox 7.4 GUI

[jongpac]

Hi there,

I was using ESXI 6.7 on my Dell server R620 and it is working well,

While, installing process, I can complete the installation with ACPI error.

from the local machine, if I try to access 192.168.1.85:8006 from my local machine

I have no connection to the proxmox, but on my Dell server, I can see the the screen which shows the IP address for GUI.

I directly connected to the Dell R620 and I access through the IDRAC.

What should I do from this.

Thank you in advance.

 

[bbgeek17]

Hi @jongpac , welcome to the forum.

The output of your "ip a" conveniently shows that "vmbr0" bridge interface sits on top of "IDRAC" port. Unless you've configured the port for "sharing" between IDRAC and OS, that port is not generally available for the OS.

I'd recommend that you add additional cable to one of the other ports and move the VMBR0 to that port.

Good luck

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[jongpac]

Hi @jongpac , welcome to the forum.

The output of your "ip a" conveniently shows that "vmbr0" bridge interface sits on top of "IDRAC" port. Unless you've configured the port for "sharing" between IDRAC and OS, that port is not generally available for the OS.

I'd recommend that you add additional cable to one of the other ports and move the VMBR0 to that port.

Good luck

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

Thank you so much, based on your advice I connect extra and try re-installation with upper version for this time, I appreciate for your advice!