i wanted to activate the 2nd Ethernet Adapter on my Server, the link doesn't go up
i've already tried to make some changes in bios.
dmesg | grep i40e
[ 2.649118] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 2.8.20-k
[ 2.649119] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
[ 2.665738] i40e 0000:60:00.0: fw 3.1.57069 api 1.5 nvm 3.33 0x80000e48 1.1876.0 [8086:37d1] [15d9:37d1]
[ 2.669678] i40e 0000:60:00.0: MAC address: 3c:ec:ef:00:57:f0
[ 2.669827] i40e 0000:60:00.0: FW LLDP is enabled
[ 2.676830] i40e 0000:60:00.0 eth0: NIC Link is Up, 1000 Mbps Full Duplex, Flow Control: None
[ 2.678089] i40e 0000:60:00.0: Added LAN device PF0 bus=0x60 dev=0x00 func=0x00
[ 2.678608] i40e 0000:60:00.0: Features: PF-id[0] VFs: 32 VSIs: 66 QP: 20 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA
[ 2.694270] i40e 0000:60:00.1: fw 3.1.57069 api 1.5 nvm 3.33 0x80000e48 1.1876.0 [8086:37d1] [15d9:37d1]
[ 2.697896] i40e 0000:60:00.1: MAC address: 3c:ec:ef:00:57:f1
[ 2.698058] i40e 0000:60:00.1: FW LLDP is enabled
[ 2.705793] i40e 0000:60:00.1: Added LAN device PF1 bus=0x60 dev=0x00 func=0x01
[ 2.706275] i40e 0000:60:00.1: Features: PF-id[1] VFs: 32 VSIs: 66 QP: 20 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA
[ 2.723363] i40e 0000:60:00.0 eno0: renamed from eth0
[ 2.746167] i40e 0000:60:00.1 enp96s0f1: renamed from eth1
[ 8.603069] i40e 0000:60:00.0: eno0 is entering allmulti mode.
ethtool enp96s0f1
Settings for enp96s0f1:
Supported ports: [ ]
Supported link modes: 1000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Port: Other
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
Supports Wake-on: g
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
also tried
GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on"
and
vfio
vfio_iommu_type1
vfio_pci
vfio_virqfd
# ifconfig enp96s0f1 down
# ifconfig enp96s0f1 up
Dec 15 00:30:13 kernel: [ 1006.387496] irq 129: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387508] irq 130: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387521] irq 131: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387532] irq 132: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387544] irq 133: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387556] irq 134: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387567] irq 135: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387580] irq 136: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387592] irq 137: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387603] irq 138: Affinity broken due to vector space exhaustion.
no chance. any ideas ?
i've already tried to make some changes in bios.
dmesg | grep i40e
[ 2.649118] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 2.8.20-k
[ 2.649119] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
[ 2.665738] i40e 0000:60:00.0: fw 3.1.57069 api 1.5 nvm 3.33 0x80000e48 1.1876.0 [8086:37d1] [15d9:37d1]
[ 2.669678] i40e 0000:60:00.0: MAC address: 3c:ec:ef:00:57:f0
[ 2.669827] i40e 0000:60:00.0: FW LLDP is enabled
[ 2.676830] i40e 0000:60:00.0 eth0: NIC Link is Up, 1000 Mbps Full Duplex, Flow Control: None
[ 2.678089] i40e 0000:60:00.0: Added LAN device PF0 bus=0x60 dev=0x00 func=0x00
[ 2.678608] i40e 0000:60:00.0: Features: PF-id[0] VFs: 32 VSIs: 66 QP: 20 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA
[ 2.694270] i40e 0000:60:00.1: fw 3.1.57069 api 1.5 nvm 3.33 0x80000e48 1.1876.0 [8086:37d1] [15d9:37d1]
[ 2.697896] i40e 0000:60:00.1: MAC address: 3c:ec:ef:00:57:f1
[ 2.698058] i40e 0000:60:00.1: FW LLDP is enabled
[ 2.705793] i40e 0000:60:00.1: Added LAN device PF1 bus=0x60 dev=0x00 func=0x01
[ 2.706275] i40e 0000:60:00.1: Features: PF-id[1] VFs: 32 VSIs: 66 QP: 20 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve PTP VEPA
[ 2.723363] i40e 0000:60:00.0 eno0: renamed from eth0
[ 2.746167] i40e 0000:60:00.1 enp96s0f1: renamed from eth1
[ 8.603069] i40e 0000:60:00.0: eno0 is entering allmulti mode.
ethtool enp96s0f1
Settings for enp96s0f1:
Supported ports: [ ]
Supported link modes: 1000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Port: Other
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
Supports Wake-on: g
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
also tried
GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on"
and
vfio
vfio_iommu_type1
vfio_pci
vfio_virqfd
# ifconfig enp96s0f1 down
# ifconfig enp96s0f1 up
Dec 15 00:30:13 kernel: [ 1006.387496] irq 129: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387508] irq 130: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387521] irq 131: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387532] irq 132: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387544] irq 133: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387556] irq 134: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387567] irq 135: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387580] irq 136: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387592] irq 137: Affinity broken due to vector space exhaustion.
Dec 15 00:30:13 kernel: [ 1006.387603] irq 138: Affinity broken due to vector space exhaustion.
no chance. any ideas ?