No IP after reboot of node - No vmbr0 interface

G

gafrol

New Member
Apr 30, 2025
5
0
1
On a newly installed PVE I encounter a problem where the node has no IP address after a reboot.
This is the network status right after a reboot

photo_2025-04-30_10-16-24.jpg

Only after executing systemctl start networking services all ok....

1746001180352.png


1746001235288.png



1746001292861.png

1746001336294.png

1746001372575.png

1746001508457.png

What's the problem here?
 
Last edited:
please post the output of journalctl -b --until "2025-04-30 10:19:00" in code tags or as text attachment.
 
the log shows some USB hub/device making trouble and blocking proper bootup:

Code: 
771:Apr 30 10:11:18 proxmox kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
772:Apr 30 10:11:18 proxmox kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
773:Apr 30 10:11:18 proxmox kernel: usb usb3: Product: xHCI Host Controller
774:Apr 30 10:11:18 proxmox kernel: usb usb3: Manufacturer: Linux 6.8.12-9-pve xhci-hcd
775:Apr 30 10:11:18 proxmox kernel: usb usb3: SerialNumber: 0000:00:14.0
778:Apr 30 10:11:18 proxmox kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
779:Apr 30 10:11:18 proxmox kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
795:Apr 30 10:11:18 proxmox kernel: usb 3-1: new high-speed USB device number 2 using xhci_hcd
1034:Apr 30 10:11:18 proxmox kernel: usb 3-1: device descriptor read/64, error -110
1036:Apr 30 10:11:18 proxmox kernel: usb 3-1: device descriptor read/64, error -110
1037:Apr 30 10:11:18 proxmox kernel: usb 3-1: new high-speed USB device number 3 using xhci_hcd
1038:Apr 30 10:11:18 proxmox kernel: usb 3-1: device descriptor read/64, error -110
1040:Apr 30 10:11:18 proxmox kernel: usb 3-1: device descriptor read/64, error -110
1041:Apr 30 10:11:18 proxmox kernel: usb usb3-port1: attempt power cycle
1042:Apr 30 10:11:18 proxmox kernel: usb 3-1: new high-speed USB device number 4 using xhci_hcd
1045:Apr 30 10:11:18 proxmox kernel: usb 3-1: device not accepting address 4, error -62
1046:Apr 30 10:11:18 proxmox kernel: usb 3-1: new high-speed USB device number 5 using xhci_hcd
1049:Apr 30 10:11:18 proxmox kernel: usb 3-1: device not accepting address 5, error -62
1050:Apr 30 10:11:18 proxmox kernel: usb usb3-port1: unable to enumerate USB device
1051:Apr 30 10:11:18 proxmox kernel: usb 3-2: new full-speed USB device number 6 using xhci_hcd
1052:Apr 30 10:11:18 proxmox kernel: usb 3-2: New USB device found, idVendor=24ae, idProduct=1005, bcdDevice= 1.10
1053:Apr 30 10:11:18 proxmox kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1054:Apr 30 10:11:18 proxmox kernel: usb 3-2: Product: Rapoo 2.4G Wireless Touchpad Keyboard
1055:Apr 30 10:11:18 proxmox kernel: usb 3-2: Manufacturer: RAPOO
1056:Apr 30 10:11:18 proxmox kernel: usb 3-13: new high-speed USB device number 7 using xhci_hcd
1057:Apr 30 10:11:18 proxmox kernel: usb 3-13: device descriptor read/64, error -110
1058:Apr 30 10:11:18 proxmox kernel: usb 3-13: device descriptor read/64, error -110
1059:Apr 30 10:11:18 proxmox kernel: usb 3-13: new high-speed USB device number 8 using xhci_hcd
1061:Apr 30 10:11:18 proxmox kernel: usb 3-13: device descriptor read/64, error -110
1062:Apr 30 10:11:18 proxmox kernel: usb 3-13: device descriptor read/64, error -110
1063:Apr 30 10:11:18 proxmox kernel: usb usb3-port13: attempt power cycle
1064:Apr 30 10:11:18 proxmox kernel: usb 3-13: new high-speed USB device number 9 using xhci_hcd
1067:Apr 30 10:11:18 proxmox kernel: usb 3-13: device not accepting address 9, error -62
1068:Apr 30 10:11:18 proxmox kernel: usb 3-13: new high-speed USB device number 10 using xhci_hcd
1120:Apr 30 10:11:18 proxmox kernel: usb 3-13: device not accepting address 10, error -62
1121:Apr 30 10:11:18 proxmox kernel: usb usb3-port13: unable to enumerate USB device
1158:Apr 30 10:10:10 proxmox systemd-udevd[378]: usb3: Worker [405] processing SEQNUM=3093 is taking a long time
1159:Apr 30 10:11:18 proxmox kernel: input: RAPOO Rapoo 2.4G Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:24AE:1005.0001/input/input13
1161:Apr 30 10:11:18 proxmox kernel: input: RAPOO Rapoo 2.4G Wireless Touchpad Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:24AE:1005.0002/input/input15
1184:Apr 30 10:11:18 proxmox kernel: input: RAPOO Rapoo 2.4G Wireless Touchpad Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:24AE:1005.0002/input/input16
1186:Apr 30 10:11:18 proxmox kernel: input: RAPOO Rapoo 2.4G Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:24AE:1005.0003/input/input17

I suspect either this wireless keyboard, or a hub it is connected to being the culprit..
 
is the wireless keyboard plugged into a hub? or does it have a built-in hub?
 
well, something is not behaving well there, it seems this is very old hardware, maybe there is a bios update that fixes something?

the log also says there's 15 USB ports on the USB 2.0 hub, which seems like a bit much:

Code: 
Apr 30 10:11:18 proxmox kernel: hub 3-0:1.0: USB hub found
Apr 30 10:11:18 proxmox kernel: hub 3-0:1.0: 15 ports detected
 
  • Like
Reactions: news
You must log in or register to reply here.
Top Bottom
Back