No internet after installation.

F

fox.2025

New Member
Mar 8, 2025
2
0
1
Hello everyone, I'm a newcomer to Proxmox and I'm excited to share my experience with you. I've been using an OrangePi 5 as part of my journey to build a home lab, and many tutorials I've followed have recommended using Proxmox for its ease of use and flexibility.


Recently, I installed the Armbian system on my OrangePi 5 and then went ahead to install Proxmox. After setting up the network bridge, I was able to access Proxmox's web interface without any issues. However, I'm having trouble establishing a connection to the outside world - in other words, I don't have internet access.


I've tried various troubleshooting steps, but nothing seems to be working for me. Has anyone else encountered this issue or know of a solution? Any help or guidance would be greatly appreciated.
 
Bash: 
auto lo
iface lo inet loopback

iface end1 inet manual

auto vmbr0
iface vmbr0 inet static
        address xxx.xxx.x.77/24
        gateway xxx.xxx.x.1
        bridge-ports end1
        bridge-stp off
        bridge-fd 0

        post-up   echo 1 > /proc/sys/net/ipv4/ip_forward
        post-up   iptables -t nat -A POSTROUTING -s '10.10.10.0/24' -o eno1 -j MASQUERADE
        post-down iptables -t nat -D POSTROUTING -s '10.10.10.0/24' -o eno1 -j MASQUERADE
 
OrangePi 5 is not x86 Hardware, so there is not support over this forum and the proxmox gmbh.
It will not work, as you expected.
 
You must log in or register to reply here.
Top Bottom