no access from web ui nor ssh

[bensz]

Hello,
I didn't used the web interface for months as everything works fined.
Yesterday I wanted to change parameters on one of my VM, but the webui doesn't reply. The ssh connection doesn't work anymore.
I went on the server and I reboot it. Everything seems fine, but I have no access anymore.
If I try nmap on the server, the port 8006 is open for wpl-analytics service but from another computer, the server doesn't reply.
I have internet access on the server so everything is fine for this.
I searched on internet for solution but I don't understand the problem.

pveversion is 7.4-15 kernel 5.15.107-2-pve

Thanks for help
Benoit

 

[stuartbh]

Benoit,

I am having a similar problem, have you found any solution as yet?

Stuart

 

[Maximiliano]

Hello, are systemctl status pvedaemon.service and systemctl status pveproxy.service on your server displaying any problems?

How are you connecting to the server? Using the explicit ip address or a hostname? The later might break due to factors unrelated to Proxmox VE itself.

 

[bensz]

Hello,
Thanks for your reply.
The 2 services are running without problems.
To connect I use explicit IP. I'm in the same subnetwork, and there's only a switch between me and the server.
Thanks
Benoit

 

[bensz]

Hi Stuart,
No more information for the moment

 

[Maximiliano]

Just to be clear, does your server list the correct ip address at /etc/network/interfaces and /etc/hosts?

 

[bensz]

/etc/network/interfaces

auto eno1
iface eno1 inet manual

auto eno2
iface eno2 inet static
address 192.168.4.201/24

auto vmbr0
iface vmbr0 inet static
address 192.168.4.200/24
gateway 192.168.4.1
bridge-ports eno1
bridge-stp off
bridge-fd 0

/etc/hosts

127.0.0.1 localhost.localdomain localhost
192.168.4.200 lucky.zelec.lan lucky


Thanks
Benoit

 

[Maximiliano]

I would try removing the IP configuration for eno2 (i.e. replacing the three lines with just iface eno2 inet manual), then running ifreload -a on the server and see if the situation improves.

 

[bensz]

there's no changes

 

[bensz]

I don't understand why, but that works fine now. I didn't change anything.
Now I have a problem with LV which failed to activate.
I'll start a new post
Thanks for help
Benoit