Hy,
I have a problem installing a new node. I added it to an existing cluster that works fine and sees.
I then installed the ceph manually as I didn’t know about the interface. (pveceph install) Then I issued the following command "pveceph init".
If I issue the "pveceph setatus" command from the new utility, I see the ceph information.
for "pvesm status" command, sees storage as inactive
In the GUI, it writes the following error
The rest of the gui interface works fine but only the CEPH part is not real.
The new node and cluster version are the same.
Can anyone give me advice on where to go?
Tanks!
Balint
I have a problem installing a new node. I added it to an existing cluster that works fine and sees.
I then installed the ceph manually as I didn’t know about the interface. (pveceph install) Then I issued the following command "pveceph init".
If I issue the "pveceph setatus" command from the new utility, I see the ceph information.
Code:
2022-02-08 15:51:54.510 7f5393116700 -1 monclient: get_monmap_and_config failed to get config
cluster:
id: 25bc166e-8438-4ded-ad72-ee96d62f0217
health: HEALTH_OK
services:
mon: 5 daemons, quorum (age 15h)
mgr: (active, since 15h), standbys:
osd: 36 osds: 36 up (since 15h), 36 in (since 4M)
data:
pools: pools, pgs
objects: 6.88M objects, 26 TiB
usage:
pgs: active+clean
io:
client: 58 MiB/s rd, 32 MiB/s wr, 942 op/s rd, 1.62k op/s wrfor "pvesm status" command, sees storage as inactive
Code:
Name Type Status Total Used Available %
local dir active 119863296 2198016 117665280 1.83%
ceph1 rbd inactive 0 0 0 0.00%In the GUI, it writes the following error
The rest of the gui interface works fine but only the CEPH part is not real.
The new node and cluster version are the same.
Code:
proxmox-ve: 6.4-1 (running kernel: 5.4.162-1-pve)
pve-manager: 6.4-13 (running version: 6.4-13/9f411e79)
pve-kernel-5.4: 6.4-12
pve-kernel-helper: 6.4-12
pve-kernel-5.4.162-1-pve: 5.4.162-2
pve-kernel-5.4.106-1-pve: 5.4.106-1
ceph: 14.2.22-pve1
ceph-fuse: 14.2.22-pve1
corosync: 3.1.5-pve2~bpo10+1
criu: 3.11-3
glusterfs-client: 5.5-3
ifupdown: not correctly installed
ifupdown2: 3.0.0-1+pve4~bpo10
ksm-control-daemon: 1.3-1
libjs-extjs: 6.0.1-10
libknet1: 1.22-pve2~bpo10+1
libproxmox-acme-perl: 1.1.0
libproxmox-backup-qemu0: 1.1.0-1
libpve-access-control: 6.4-3
libpve-apiclient-perl: 3.1-3
libpve-common-perl: 6.4-4
libpve-guest-common-perl: 3.1-5
libpve-http-server-perl: 3.2-3
libpve-storage-perl: 6.4-1
libqb0: 1.0.5-1
libspice-server1: 0.14.2-4~pve6+1
lvm2: 2.03.02-pve4
lxc-pve: 4.0.6-2
lxcfs: 4.0.6-pve1
novnc-pve: 1.1.0-1
proxmox-backup-client: 1.1.13-2
proxmox-mini-journalreader: 1.1-1
proxmox-widget-toolkit: 2.6-1
pve-cluster: 6.4-1
pve-container: 3.3-6
pve-docs: 6.4-2
pve-edk2-firmware: 2.20200531-1
pve-firewall: 4.1-4
pve-firmware: 3.3-2
pve-ha-manager: 3.1-1
pve-i18n: 2.3-1
pve-qemu-kvm: 5.2.0-6
pve-xtermjs: 4.7.0-3
qemu-server: 6.4-2
smartmontools: 7.2-pve2
spiceterm: 3.1-1
vncterm: 1.6-2
zfsutils-linux: 2.0.7-pve1Can anyone give me advice on where to go?
Tanks!
Balint