New Installation - ?Kernel Panic? and freezes

Meister_Knobi

New Member
Dec 21, 2023
2
0
1
Hello everybody,

after a year of hesitation i finaly bought some hardware and stated to tinker.

AMD Ryzen Pro 5 4650G
ASRock X570 Pro4
2 Kioxia Exceria Plus G3
4x4 GB Balsiticx Sport DDR 2400mhz (lented)

Ive installed PVE 8.1, updated the System with the no-supcription repo and created some VMs. Than at some point in time i wondered: I thought i had started at least one VM. Ive tryed to start some VM but no luck, so ve tred to reboot. After 10 minutes of not doing anything i cut the power and booted again. VMs where Running fine but it got late and called it a day. This time it shut down nicely.

On the next day after about 10m after boot the VMs again gone offline with no heavy liftig or idleing. Ive run about 10 times Memtest86plus and got all passes. Then back in pve without ever starting any VMs the WebUI got stuck, the shell on the physikal maschine too. Ive tryed to force this error but with no luck. it just happens.

Then ive changed some BIOS Settings, disabled SR-IOV, PCIe ARI, ReSize BAR and Above 4G and enabled CSM again. Frist i thougt ive got it. About an houre log everything seemed fine with an running Trunas Scale VM and 2 Ubuntu based VMs but the freezing WebUI and Shell apeard again.

Code:
root@pve:~# pveversion -v
proxmox-ve: 8.1.0 (running kernel: 6.5.11-7-pve)
pve-manager: 8.1.3 (running version: 8.1.3/b46aac3b42da5d15)
proxmox-kernel-helper: 8.1.0
proxmox-kernel-6.5: 6.5.11-7
proxmox-kernel-6.5.11-7-pve-signed: 6.5.11-7
proxmox-kernel-6.5.11-4-pve-signed: 6.5.11-4
ceph-fuse: 17.2.7-pve1
corosync: 3.1.7-pve3
criu: 3.17.1-2
glusterfs-client: 10.3-5
ifupdown2: 3.2.0-1+pmx7
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-4
libknet1: 1.28-pve1
libproxmox-acme-perl: 1.5.0
libproxmox-backup-qemu0: 1.4.1
libproxmox-rs-perl: 0.3.3
libpve-access-control: 8.0.7
libpve-apiclient-perl: 3.3.1
libpve-common-perl: 8.1.0
libpve-guest-common-perl: 5.0.6
libpve-http-server-perl: 5.0.5
libpve-network-perl: 0.9.5
libpve-rs-perl: 0.8.7
libpve-storage-perl: 8.0.5
libspice-server1: 0.15.1-1
lvm2: 2.03.16-2
lxc-pve: 5.0.2-4
lxcfs: 5.0.3-pve4
novnc-pve: 1.4.0-3
proxmox-backup-client: 3.1.2-1
proxmox-backup-file-restore: 3.1.2-1
proxmox-kernel-helper: 8.1.0
proxmox-mail-forward: 0.2.2
proxmox-mini-journalreader: 1.4.0
proxmox-offline-mirror-helper: 0.6.3
proxmox-widget-toolkit: 4.1.3
pve-cluster: 8.0.5
pve-container: 5.0.8
pve-docs: 8.1.3
pve-edk2-firmware: 4.2023.08-2
pve-firewall: 5.0.3
pve-firmware: 3.9-1
pve-ha-manager: 4.0.3
pve-i18n: 3.1.5
pve-qemu-kvm: 8.1.2-6
pve-xtermjs: 5.3.0-3
qemu-server: 8.0.10
smartmontools: 7.3-pve1
spiceterm: 3.3.0
swtpm: 0.8.0+pve1
vncterm: 1.8.0
zfsutils-linux: 2.2.2-pve1
root@pve:~#

Im out of ideas and i ve found nothing like this problems to PVE 8.1.
I dont know with part of the syslog is intresting. Ive put the last 4k lines the attachments.

When someone has a clue whats wrong with my PVE please let me know. Thanks.

As of im writing this at least my host hasn't freezed again.
 

Attachments

Update:
I've tryed to use another kernel. 6.2.16-20-pve, but when y try to boot it it cat import the rpool because of unsupported feature vdev_zaps_v2. Ive tried to import in maually but got the same error massage.
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!